Türkçe

SPIE Optics and Photonics 2025: Kyle Myers from Puente elected as SPIE Chair

13
2025-08-08 14:26:09
Çeviriyi gör

The founder and principal of Puente Solutions Kyle J. Myers has been elected to serve as the 2026 Vice President of SPIE, the international society for optics and photonics. With her election, Myers joins the SPIE presidential chain. She will serve as president-elect in 2027, and as the Society’s president in 2028.

 



Newly-elected: Myers, McNally, Rubinsztein-Dunlop, Wade, Medicus, and Erdmann


The 2025 SPIE President Peter de Groot, Zygo Corp. scientist emeritus, made the announcement along with other SPIE election results at this year’s Annual General Meeting of the Society on 5 August, during SPIE Optics + Photonics, in San Diego. Terms begin on 1 January 2026.

Myers, founder and principal at Puente Solutions, is also currently a fellow at the Hagler Institute for Advanced Study at Texas A&M University. Her areas of technical research across her career in government, industry, and academia have included medical imaging and biomedical optics; signal processing and AI/ML; vision science and perception; and technical translation from ideation to market authorization.

From 1987 until 2021, Myers worked at the FDA’s Center for Devices and Radiological Health; her final role there was as Director of the Division of Imaging, Diagnostics, and Software Reliability.

An SPIE Fellow, Myers was the recipient of the 2024 SPIE Harrison H. Barrett Award in Medical Imaging, and a 2006 recipient of the Joseph W. Goodman Book Writing Award. She sits on the Society’s Strategic Planning Committee and its Publications Committee. From 2018-2023, she served on the SPIE Board of Directors.

She has participated as an SPIE Awards Program Chair, an associate editor for the Journal of Medical Imaging, and, from 1996-2005, as part of the program committee for the Image Processing Conference at SPIE Medical Imaging. Myers is currently on the program committee for the Image Perception, Observer Performance, and Technology Assessment conference at SPIE Medical Imaging. She is also a fellow of AAPM, AIMBE, and Optica, and a member of the National Academy of Engineering.

Myers was featured in the 2014 SPIE Women in Optics Planner where she stated: “I have devoted my career to advancing approaches for evaluation of medical imaging devices from a subjective practice to an objective and quantitative science; my lab develops methods for evaluating novel medical imaging devices and provides independent, objective data regarding device performance.”
“This is a type of lab science that is not done elsewhere. It is extremely rewarding to have a research job that is concretely assisting in getting new medical products to patients as quickly as possible, based on solid scientific evidence of their benefits.”

“Through SPIE we are working for more than the advancement of optics and photonics technologies — we are working for the betterment of the human condition,” said Myers. “I look forward to serving SPIE as we work together to do even more to educate, empower, grow, and support optics and photonics professionals around the world.”

Other SPIE electees

Alongside Myers, University of Rochester Professor Julie Bentley will serve as the 2026 SPIE President while Cather Simpson of the University of Auckland and Orbis Diagnostics, will serve as President-Elect. Jim McNally, CEO of StratTHNK Associates, was elected to serve as the 2026 SPIE Secretary/Treasurer.

The following newly-elected Society Directors will serve three-year terms from 2026-2028:

Halina Rubinsztein-Dunlop, professor of physics at the University of Queensland and deputy director of the Australian Research Council’s Center of Excellence in Quantum Biotechnology.
Jessica Wade, research fellow and lecturer at Imperial College London.
Kate Medicus, CEO and owner of Ruda Optical.
Rainer Erdmann, CEO and founder of PicoQuant.

The SPIE nominating committee accepts recommendations for the election slate on an ongoing basis. Directors, who serve a three-year term, are expected to attend and participate in three board meetings each year.

Source: optics.org

İlgili öneriler
  • Photon automation expands through new laser application laboratories

    Photon Automation, Inc., headquartered in Greenfield, Indiana, has been committed to providing automated laser technology solutions since 2000. The company is pleased to announce the opening of its state-of-the-art laser application laboratory in Farmington Hills, Michigan. This 7400 square foot facility will be led by renowned laser physicist Dr. Najah George, who has over 35 years of extensive e...

    2023-09-01
    Çeviriyi gör
  • Laser Photonics officially launches its SaberTech laser cutting system

    Recently, Laser Photonics (LPC) officially launched its SaberTech laser cutting system. This system not only enriches the product line of LPC's laser cleaning, welding, marking, and engraving systems, but also marks another important breakthrough for the company in the field of laser technology. This product release is another heavyweight measure after LPC's latest generation laser cleaning system...

    2024-06-19
    Çeviriyi gör
  • Safran Group believes that additive manufacturing is playing an increasingly important role in engines

    Safran Group showcased a 3-foot diameter turbine aft casing manufactured using additive manufacturing technology under the RISE technology program at the Paris Air Show in recent years. This component is Safran's largest additive manufacturing component to date, indicating the increasingly widespread application of additive manufacturing in the design and manufacturing of turbofan engines. In ea...

    06-18
    Çeviriyi gör
  • Each unit of metamaterials used for simulating optical calculations is smaller than the wavelength of the light they are designed to manipulate

    The new architecture based on metamaterials provides a promising platform for constructing large-scale production and reprogrammable solutions that can perform computational tasks using light.The idea of simulating computers - a device that uses continuous variables instead of zero sum ones - may evoke outdated machinery, from mechanical watches to bomb sight devices used in World War II. But emer...

    2024-03-30
    Çeviriyi gör
  • Researchers have developed a QCL DFB continuous laser for gas detection

    Alpes Laser was founded in 1998 in Nazhatel, Switzerland and was the first company to bring quantum cascade lasers to the market. It released its first continuous laser in 2001 and its first high gain laser in 2009, thus maintaining this priority position.In 2004, the first commercial laser was introduced.Principle: In a single mode laser, the grating is etched into the active region to force the ...

    2023-08-16
    Çeviriyi gör