Patrick
Kabul Edilen Cevap
Kabul Edilen CevapThe system blowing signal to the solenoid valve requires the addition of a relay. You can try it out
1
Yanıtla
My RDWelder-SW handheld welding system does not blow gas
I've encountered a new issue with my RDWelder-SW handheld welding system. I was in the middle of a job, and everything else was functioning normally, but I noticed that the shielding gas was not being supplied properly. What could be the reason for this?
Bu soruyu cevaplayabilir misiniz?
Lütfen bu soruya sahip olanlara yardımcı olmak için cevabınızı yazın.
Okay, I installed the relay and everything is normal now.