Which color is the best for laser coding?

AL.TAL

2024-04-16

226

1

0

What is the control technology for the acceleration and deceleration process of stepper motors?

LWE

2024-04-15

260

2

0

In the field of glass processing, laser cutting technology has gradually become a new favorite in the industry due to its high precision, high efficiency, and environmental protection characteristics. Among numerous laser cutting technologies, ultraviolet laser cutting machines and infrared laser cutting machines have become the focus of the market...

Noah

2024-04-15

211

1

0

Servo motors usually have a braking function, which generally refers to the electromagnetic mechanical holding brake device at the rear end of the servo motor. It is usually installed at the rear end of the motor and brakes the motor and locks the motor spindle through the brake pads acting on the motor spindle during operation.So the brake of th...

Ethan

2024-04-15

241

1

0

Servo motor wiring steps and methods:1. To determine the power cord and ground wire, servo motors usually need to receive power supply. Firstly, it is necessary to confirm the power requirements of the servo system and the wiring method of the power cord. Usually there are two power cords, one is the positive (+) and the other is the negative (-)....

Miller

2024-04-13

245

2

0

Why does a stepper motor not require an encoder?

Darren

2024-04-13

229

2

0

Can the gear transmission system eliminate travel errors through rotation?

Cyril

2024-04-13

305

1

0

Under what circumstances should the output power of the laser cutting machine be increased?

Aaron

2024-04-12

213

1

0

1. Adjust the machine assembly to improve cutting efficiency.Guide rail: When installing the guide rail, it must be parallel. If the guide rail is not parallel, there will be resistance during the operation and development of the machine equipment. The workpiece designed by cutting will have serrated edges. Therefore, the Y-axis guide rail must ful...

Abel

2024-04-12

196

1

0

If it is a machine, there will be losses, and the same goes for metal material laser cutting machines. In the long-term development and use process, we will definitely affect the existence of some more or less losses, such as slow cutting speed, poor cutting accuracy, and so on. Many people can think that it must be a decrease in laser power. In fa...

Williams

2024-04-12

237

1

0

What is the acceleration and deceleration time set in the servo motor? What is its purpose?

Tory

2024-04-11

249

2

0

The visual laser control system is a new type of CNC system that combines visual recognition technology and laser control technology. Its principle is to identify the processing object through visual technology, and control the laser control to precisely process the target by positioning the processing object. Compared with ordinary laser control s...

David

2024-04-11

214

1

0

What should I do if the stepper motor loses its step?

Keegan

2024-04-11

207

1

0

A research team from the University of Alto in Finland has explored and implemented a new mechanism for laser operation. Through this mechanism, users can remotely control plasma nanolasers using a magnetic field.Previously, the only way was to "switch" plasma nanolasers through direct operation. However, with the development of topological photo...

Henry

2024-04-10

254

1

0

Hello dear Ruida team,i got the Ruida RDACC Fiber Module V2.0 from you. I activated the calibration menu during the dry running test.Here the voltage was displayed to me and then the module switches after two seconds and then displayed 0 volts. Because i didn't understand it at first, i confirmed the 0 Volt value by pressing Enter. Now the modu...

Gewindestange

2023-12-12

228

4

0