So I’ll start an engraving and the first couple inches goes where I planned then it jogs over several inches to the right, engraves a couple more inches, then jogs back over in line with the bottom. Not sure if a lightburn issue or not but haven’t been having the problem until no...

• laser engraving

Vasili

5 hours ago

150

2

0

I downloaded and installed a font on my laptop, but it cannot be loaded into rdworks v8. What is the reason?

• RDWorksV8

Vasili

11-27

276

1

0

Using my p3 laser and i get to about 75% complete of a project and my laser stops firing but continues to run program. Any help is appreciated.

• laser

Vasili

11-20

311

2

0

What setting in LaserGRBL controls turning on/off the Laser Focus Light?

• laser engraving

Vasili

11-03

423

1

0

Experimental and Mechanism Study of Efficient CFRP Cutting Based on Continuous Wave Laser and Water Jet Guided Laser Combined Technology Abstract With the extensive use of large-thickness carbon fibre reinforced polymer (CFRP) in aerospace, one of the key issues that need to be ...

• laser cutting

Vasili

09-16

696

1

1

Abstract The surface strengthening of ball valves faces challenges such as high dilution rate and grain coarsening. However, high-speed laser cladding (HSLC) reduces dilution rate by reducing heat input through high scanning rate, and refines grain size through rapid cooling. The...

• laser cladding

Vasili

09-15

747

1

1

Choosing the right semiconductor laser requires consideration of multiple factors. Here are some key points that can help you make the right choice: 1. Application requirements: Determine the applications for which the laser will be used, such as communication, medical, industri...

• semiconductor laser

Vasili

04-11

875

0

0

The laser welding head is connected to the laser output end using a fiber coupler, and the optical path is deflected, converged, and shaped through internal optical components. Meanwhile, by establishing a connection between the motion actuator and the product coordinate system, ...

• laser welding

Vasili

03-21

1K

0

0

1、 Laser Laser is the core component of laser marking machine and an important component for generating laser. Normally, the service life is long, but regular cleaning and maintenance are required. If the laser shakes or becomes unstable during use, it needs to be replaced or rep...

• laser marking
• laser lenses

Vasili

03-18

888

0

0

The reason for the sudden failure of laser cutting machine 1. Laser malfunction. Laser is the core component of laser cutting machine. If the laser malfunctions, it will cause the laser cutting machine to malfunction. 2. Optical path malfunction. The optical path is the channel ...

• laser cutting

Vasili

01-20

1K

0

1

Working principle of laser rust removal machine Laser rust removal machine is a high-tech equipment that uses a high-energy density laser beam to instantly hit the surface of the object being removed, vaporize the dirt, and achieve rust removal effect. The laser beam of the laser...

• laser cleaning

Vasili

2024-12-18

918

1

0

UV laser marking machine is a high-precision and high-speed laser marking equipment widely used for surface marking of various metal and non-metal materials. However, in practical use, there may be a problem of decreased laser power. This article will analyze the reasons for the ...

• laser marking

Vasili

2024-11-26

959

1

0

Brushless motors and brushed motors each have unique advantages, but there may also be some common faults. Advantages of brushless motors: 1. Efficient and energy-saving: Brushless motors use electronic commutation instead of traditional mechanical commutation, making the motor...

• brushless motor
• brushed motor

Vasili

2024-08-07

1K

1

0

Femtosecond is a unit of time, and one femtosecond is equal to 10 ^ -15 seconds. Femtosecond laser refers to a laser with a pulse width of femtosecond level. Femtosecond laser has the characteristics of short pulse width and high power peak. Due to its extremely short pulse width...

• laser control
• laser marking

Vasili

2024-06-26

1K

0

0

CO2 laser marking machine is a common industrial marking equipment that uses a CO2 laser as the light source to mark the workpiece by controlling the position and intensity of the laser beam. However, when using CO2 laser marking machines, sometimes there may be uneven light outp...

• laser marking

Vasili

2024-06-19

856

1

0