The high thermal conductivity and low melting point of aluminum determine that its welding process requires a special method distinct from other metals. Mastering the correct knowledge and tools is necessary to transform these challenges into solid, smooth, and high-quality welds...

• laser welding

Abel

4 hours ago

17

0

0

When I use lightburn, making a 10mmx10mm square really draws me a 18mmx18mm square, and I don’t know how to correct it.

• laser

Abel

10-21

379

1

0

I have a 50W CO2 laser cutting and engraving machine, and recently I purchased a laser power meter. I need to develop a measurement program on how to use the laser power meter. Here is my plan. •Ensure you have the correct laser power meter for your laser source and and position...

• laser cutting
• laser engraving

Abel

11-28

726

5

0

Fault analysis: 1. The installation path is not selected correctly 2. No VBA plugin downloaded 3. The VBA plugin version is incorrect compared to the CAD version   Solution: The reinstallation path is correct. After checking, it was found that the CAD version sent was 2023 and th...

• V8
• CAD
• VBA plugin

Abel

05-19

1.1K

0

0

Reasons for Material Deformation in Laser Welding 1. Thermal stress Laser welding is the process of melting and connecting materials at high temperatures, resulting in structural changes. During the cooling process of materials, internal stress is generated due to different cooli...

• laser welding

Abel

04-01

840

2

1

Definition and Function of Laser Machine Lens Laser machine lens is an important component carried by laser cutting machines, laser engraving machines and other equipment. Its function is to focus the laser beam on a point, thereby achieving high-precision cutting, engraving and ...

• laser lenses

Abel

03-24

936

0

0

1. If the motor burns out, generally not both machines will burn out. Just change the motor object that drives the output to test whether the other machine is normal. Motor damage can generally only be replaced by contacting after-sales service. 2. Drive failure. If the drive li...

• laser marking

Abel

02-28

981

0

0

In the daily operation of laser equipment, the constant emission of light is a common and difficult problem to solve. It not only affects the quality of the product, but may also increase the maintenance cost of the equipment. Faced with the problem of continuous light emission, ...

• laser cutting
• laser marking
• laser cladding

Abel

01-15

1.2K

3

3

The reason for the bending of gear shaft shape 1. Material deformation The material of the gear shaft is affected by external forces such as torque, temperature, etc., which can cause slight deformation. After long-term use, it can also form a bending phenomenon in the shape of ...

• gearing

Abel

2024-12-25

1K

0

1

The use environment of the cleaning machine leads to a weakened effect 1. High or low ambient temperature: Laser cleaning machines are generally suitable for ambient temperatures between 5 ℃ and 35 ℃. If the ambient temperature is too high or too low, it will affect the normal op...

• laser cleaning

Abel

2024-12-13

992

0

0

1. Single phase fault This situation occurs when any phase of the power supply voltage is lost. This is because the normal operation of a three-phase induction motor requires a three-phase voltage source. Due to this malfunction, the motor may burn out or generate heat. 2. Rever...

• asynchronous motor

Abel

2024-07-12

954

1

0

How does a frequency converter change the motor speed?

• motor

Abel

2024-06-25

1.1K

1

0

UV laser is a special type of laser. Compared to CO2 laser and fiber laser, UV laser emits laser wavelengths ranging from 100 nanometers to 400 nanometers, in the high-frequency range between visible light and X-rays. Within this wavelength range, ultraviolet laser has a very hig...

• laser control
• laser marking

Abel

2024-05-10

929

1

0

Why do we still need to develop stepper motors when we have servo motors?

• motor
• stepper motor
• servo motor

Abel

2024-03-07

1K

2

0

Who has DVPHE3PLC? How to read data from the upper computer using 232? What data needs to be noted

• control

Abel

2024-02-18

822

1

0