Laser burns wood
I have an AtomStack 5 (5W) and GRBL software. When I turn on the laser to find the center point of a circular wooden block, the laser burns the wood before starting carving. Does anyone know the reason?
- laser engraving
Aaron35830What is the size of the holes in the metal plate of the laser bed?
I want to use a metal plate to make a laser bed. What is the size of the hole?
- laser cutting
Aaron38420Laser moves but does not work
I encountered a problem using a laser cutting machine. Using an industrial chiller, everything is cooling properly and all shafts are working properly. I have used different files, even those I have already completed before. It is doing all the work, but there is no work. This ma...
- laser cutting
Aaron54510No blowing during processing, no signal output
Fault analysis: 1. No fan enabled 2. Relay wiring is incorrect 3. Layer setting issue Solution: The layer parameters are set to not blow air
- layer settings
- not blowing air
Aaron1.3K00Common problems in acrylic laser cutting
Acrylic is a widely used polymer plastic with a transparency of over 92% and excellent toughness and compression resistance, 9-17 times that of glass. It has a wide range of applications in various industries such as advertising display, building decoration, furniture, lighting f...
- laser cutting
- acrylic
Aaron98700Measures and Methods to Improve Spot Stability
1. Choose high-quality optical components Importance: The accuracy and durability of optical components directly affect the transmission and focusing effect of laser beams. Measures: Select optical components with high precision, low loss, and good stability, such as lenses, mirr...
- laser cutting
Aaron94000How to solve the problem of burnt and yellow edges in laser cutting acrylic
To avoid producing burnt or yellow edges when cutting acrylic sheets, the following methods can be adopted: 1. Using high-power laser cutting machines: High power laser cutting machines can quickly and accurately complete cutting tasks, reducing the possibility of producing foca...
- laser cutting
Aaron97300Classification and characteristics of common laser cladding powders
1. Self melting alloy powder characteristic: Containing B and Si (functions: deoxidation, slagging). Substrate adaptability. It can be widely used in various materials including carbon steel, alloy steel, stainless steel, and cast iron, but it is not suitable for steel with high ...
- laser cladding
Aaron1.1K00How to reduce gear wear in a gearbox?
Gearbox gears are one of the most common components in gearboxes, and their normal operation is crucial for the performance and lifespan of the entire gearbox. Reducing gear wear is one of the key factors to ensure the normal operation of the gearbox. This article will explore se...
- gearing
Aaron1K00What are the reasons that affect the accuracy of visual laser marking
Visual laser marking is a highly accurate precision machining technology, which can usually achieve an accuracy between 0.1 and 0.05mm depending on the equipment specifications. However, due to the instability of mechanical equipment, there may occasionally be significant process...
- laser marking
Aaron1K10Selection and Process of Gear Transmission Materials
The material selection of general mechanical transmission systems is a broad concept. Here, I will mainly talk about the situation of gear transmission in iron-based friction pairs, which is the selection of gear materials. Gears can be made of various materials, including steel...
- gearing
- gear drive
Aaron94910Which lasers require air cooling and water cooling?
Which lasers require air cooling and water cooling?
- hydrocooling
Aaron92420Common servo motor faults and corresponding maintenance methods
In the era of industrial automation, servo electromechanical is the most common control part in motion control. During the operation of servo motors, it is inevitable to encounter some common faults, but how will we solve them? 1、 Preparatory work for starting the servo motor: (...
- motor
- servo motor
Aaron94110When I select the origin, a green busy timer bar will appear
my laser homes okay, yet when selecting a orgin, a green busy timer bar appears and it takes up to seven minutes to reach the origin point. this is a 10w rolylasermatic, and it’s new. most of my attempts to frame, cause the laser to crash back towards the left lower position. I r...
- LightBurn
Aaron1.2K10Is there a way to layer mask over other layers?
I’d like to simulate an image mask, but instead of an image I’d like to use a pattern made with layers. Any help is appreciated!
- LightBurn
Aaron90210