1. Laser power Power directly affects the amount of melted powder and coating efficiency per unit time. When other working parameters are determined, low power may result in incomplete powder melting, pitting after polishing, insufficient bonding force, and low coating hardness; ...

• laser cladding

Keegan

02-28

1K

0

0

1、 The lifespan of the nozzle has expired The service life of the laser cutting machine nozzle is limited, usually around 500 hours. If it exceeds the service life, both cutting quality and economic benefits will be affected, and a new nozzle needs to be replaced. 2、 Damaged noz...

• laser cutting

Keegan

01-10

870

1

1

1、 Waterway inspection The main reason for abnormal water flow in the laser is due to water blockage or pump failure. Therefore, we first need to check whether the water path of the laser is blocked and whether it is well connected. If there is a blockage in the waterway, it is n...

• laser cutting
• laser welding
• laser marking
• laser cladding

Keegan

01-06

965

0

1

Reasons for the problem of laser engraving not being round During laser engraving, there may be issues with roundness. This is mainly caused by the following reasons: 1. Unreasonable device parameter settings: If the device parameters are inaccurate or unbalanced, the accuracy an...

• laser carving

Keegan

2024-12-23

1.3K

0

0

Laser cladding technology has some advantages compared to traditional processes. The surface of the process is smooth, and the amount of workpieces processed in the later stage is very small, which saves the processing cost of workpieces for enterprises and can strengthen or rep...

• laser cladding

Keegan

2024-09-04

1.2K

0

0

Laser marking machine is a high-precision marking equipment that can mark and engrave on various materials. When using a laser marking machine for marking, it is usually necessary to import the design drawings into the marking software, then set and adjust them, and finally outpu...

• laser marking

Keegan

2024-05-30

1.2K

1

0

Why can't ordinary motors be used as variable frequency motors?

• motor
• frequency motor

Keegan

2024-05-09

1K

2

0

In today's life, the use of synchronous belts is becoming increasingly common, and its shadow can be found in large machinery such as machine tools, cars, small printers, copiers, and other small household appliances. The synchronous belt itself does not have accuracy, but its ac...

• gearing

Keegan

2024-04-23

903

1

0

What should I do if the stepper motor loses its step?

• motor
• stepper motor

Keegan

2024-04-12

1.1K

1

0

CNC equipment requires the use of servo motors because servo motors have characteristics such as high precision, high response, high speed, and high reliability, which can meet the requirements of high-precision control for CNC equipment. The servo system in CNC equipment general...

• motor
• servo motor

Keegan

2024-03-22

877

2

0

Hi guys, I’ve read multiple questions about this already, but all were already a few years old, so here I go: What’s currently possible with Lightburn automation? I’m looking for ways to automate a process: open Lightburn, import an image on a particular position on the x/y-axis ...

• LightBurn

Keegan

2024-01-04

1.1K

1

0

Hi there … newbie here. I have engraved my new logo and social media contacts but when i come to cutting rounded corners this is what is happens. Lines are not straight. Maybe the picture i uploaded gives a better feedback. Any suggestions? Project and Result pics included.

• LightBurn

Keegan

2024-01-04

1.1K

1

0

Is it possible in Lightburn to create an array or object in a circle like in the image? Now that I type this, I suppose I could do it with a rotary pointed up toward the laser But is there a way to create an array and curve it into a circle like you can with text?

• LightBurn

Keegan

2023-12-12

781

1

0

When I try to engrave a simple word, the job aborts and I get an error in the console about a line in the GRBL code needing to be an integer: I tried a new USB cable but it still happens.

• LightBurn

Keegan

2024-01-04

998

1

0

Lets say I have two layers that are mixed, and I saved them in Illustrator like BLUE and RED… But let’s say I want to change all RED layers to GREEN… How can I do it effectively straight in Lightburn? I now one options is selecting everything click by click… but what if I have ma...

• LightBurn

Keegan

2023-11-17

860

1

0