I have brought a few of the TEMU coaster blanks.. Both the rounds and the squares. I am having some problems when I do fills in that the edge tends to bleed resin, which makes cleanup and sanding almost impossible. These are raw pine wood. Does anyone have any suggestions?? Does ...

• laser engraving

Henry

5 days ago

456

4

0

I have the latest update on windows and lightburn (v2.0.04). Ran the “Calibrate Camera Lens” with no issues but running the “Calibrate Camera Alignment” I get a dark image after pressing “Capture Image”. I’ve unplugged camera, restarted lightburn, restarted computer with no help.

• laser

Henry

11-18

349

1

0

NEJE MAX 4 V2 E80， Equipped with Z-axis stepper I am trying to set lightburn so that when I input the material thickness, the z-axis will move to make it in focus. I have set the G54 z offset to -17, which is the focused position on the machine tool. When lightburn runs, it raise...

• laser

Henry

10-25

406

1

0

How to use multiple cutting heads simultaneously with RDWorks? I can only use one cutting head at a time. What settings am I missing? This is a four head CNC laser cutting machine with servo motor.

• RDWorksV8

Henry

10-16

498

2

0

Laser welding machines are widely used for efficient and high-precision welding of various metal and non-metal materials. However, in order to achieve good welding results and high efficiency, correct settings and debugging are crucial. Next, we will provide a professional introd...

• laser welding
• laser machine

Henry

04-16

854

0

0

Disadvantages of side axis powder feeding technology 1. The selection of metal powder is limited Due to the lack of protective gas, the laser melt pool can only rely on the self-protection of the molten slag during the melting of the overlay powder. Therefore, in current industri...

• laser cladding

Henry

03-25

1K

0

0

Possible causes of malfunction: Excessive clearance of bearings due to wear and tear; Uneven air gap affects the balance of the motor; Unbalanced rotor leads to vibration; The bending deformation of the shaft affects the operation of the motor; Iron core deformation or looseness,...

• motor
• asynchronous motor

Henry

02-17

1.1K

0

0

1. The motor cannot start Possible reasons: Power failure or power not connected. Parameter setting error. External control signal issue. terms of settlement: Check if the power supply is functioning properly and ensure that it is connected. Check the parameter settings of the ...

• motor

Henry

2024-07-29

1.3K

0

0

Zeroing is a big issue in servo control. There are a variety of system requirements for zeroing, different zeroing methods supported by each manufacturer's motion controller or driver, and a variety of feedback types for servo motors, resulting in a variety of zeroing methods. In...

• motor
• servo motor

Henry

2024-07-09

1.1K

1

1

The coaxial helical gear reduction motor has the following significant characteristics:   1. Compact structure and small size: The design of the coaxial helical gear reduction motor makes it highly efficient in occupying space, suitable for application scenarios that require a c...

• motor

Henry

2024-07-01

1K

1

0

Multi axis laser control system is a classification of laser control systems, mainly used for multi axis laser equipment, which is mainly used for complex pattern processing of large format. Compared to traditional single axis but laser head laser machines, multi axis laser equip...

• laser control

Henry

2024-06-14

944

1

1

1. Machine vibration During the cutting process of a laser cutting machine, if it is affected by external factors such as water tanks, exhaust fans, etc., it may generate vibration, resulting in wave marks on the cutting surface. 2. Gear slipping The slippage between the gear an...

• laser cutting

Henry

2024-04-22

1.3K

1

0

A research team from the University of Alto in Finland has explored and implemented a new mechanism for laser operation. Through this mechanism, users can remotely control plasma nanolasers using a magnetic field. Previously, the only way was to "switch" plasma nanolasers throug...

• laser control

Henry

2024-04-11

989

1

0

CO2 laser cutting machines, UV laser cutting machines, and metal laser cutting machines all use laser chillers for cooling and require maintenance of the chillers. In a metal laser cutting machine, both the laser and cutting head components require cooling from a chiller. The tw...

• hydrocooling

Henry

2024-03-18

1K

1

0

When using a servo (Panasonic) to return to the origin in a recent project, if other axes are also moving, the Z-phase zero point signal received by the PLC is easily lost, resulting in abnormal return to the origin position. Later, upon checking the driver manual, it was discove...

• motor
• servo motor

Henry

2024-03-12

1.1K

2

0