In general, the most direct way to improve processing efficiency is to increase the laser power. When the 60000 watt laser cutting machine was launched, it sparked discussions. Industry experts believe that 60000 watts have the ability to fully replace plasma and flame cutting. ...

• laser cutting

Robert Evans

10-25

379

0

0

CO2 laser engraving machines are inevitably prone to malfunctions during use, and preventive maintenance is essential. Taking systematic preventive measures can minimize the occurrence of malfunctions and ensure the smooth operation of the laser engraving machine. CO₂ Laser Engr...

• laser engraving

Robert Evans

10-13

484

0

0

The overall development trend of laser cutting equipment is to pursue higher power, faster speed, larger format, thicker cutting ability, as well as brighter and straighter cutting sections. The power of laser cutting machines continues to rise, jumping from 6000W to 8000W, and ...

• laser cutting
• laser power

Robert Evans

04-16

815

0

0

The main reasons for weld cracking 1. Material characteristics: Difference in thermal expansion coefficient: When the welded plate is composed of different materials, due to their different thermal expansion coefficients, stress will be generated during heating and cooling, leadi...

• laser welding

Robert Evans

03-25

904

0

0

Laser paint removal is a new type of laser application technology that has become increasingly popular in recent years. After the highly energy intensive laser beam is irradiated on the paint surface, it can quickly evaporate and vaporize the paint layer, thereby achieving the ef...

• laser cleaning

Robert Evans

2024-09-03

902

1

0

1、 The optical path is not parallel During laser assembly, there may be situations where the optical path is not parallel, resulting in optical center deviation. In this case, it is necessary to readjust the optical path to make it parallel in order to solve the problem of optica...

• laser cutting

Robert Evans

2024-07-30

1.1K

1

0

1. Gear overload Gear overload is a common fault of transmission gears, usually caused by unreasonable mechanical structure design of the transmission device, harsh operating environment, and excessive workload. Gear overload can cause gear cracks, gear tooth surface damage, bear...

• gearing

Robert Evans

2024-07-18

1.2K

0

0

Asynchronous motor is the most commonly used type of motor in industry and agriculture, with a capacity ranging from tens of watts to thousands of kilowatts. It is widely used in various industries of the national economy. For example, in the industrial sector, small and medium-...

• motor

Robert Evans

2024-07-01

955

1

0

What is the difference between DC brushless motors and permanent magnet synchronous motors?

• motor
• brushless motor

Robert Evans

2024-05-08

1.1K

2

0

The water-cooled unit has a large volume, relatively high applicable power, and high power consumption during working hours, so it is suitable for working scenarios with continuous working conditions and relatively thick plates. Moreover, it is easy to achieve mechanical arm oper...

• hydrocooling

Robert Evans

2024-04-10

979

0

0

Simply put, the main difference between servo motors and ordinary motors is: The servo motor has more precise positioning and feedback. Ordinary motors don't have them, they just turn on when powered on. 1. Comparison of feedback methods between servo motors and ordinary motors ...

• motor
• servo motor

Robert Evans

2024-03-18

1K

1

0

Panasonic driver MFDKTA390E-3KW motherboard is broken. A 750W motherboard has been replaced and an ERR.95 alarm has been triggered when powered on (motor and driver do not match). Please advise on how to modify the power value. The manual does not modify the power parameters.

• laser control

Robert Evans

2024-02-29

1K

1

0

Ive got a galvo fiber laser with bjjcz controller and a k40 with the monport lightburn board. Which product license do i purchase? Do i get the 150$ Galvo license or do i get the 60$ gcode and 90$ galvo add on? Little confused here, thanks!!

• LightBurn

Robert Evans

2024-01-16

942

1

0

on mij windows 11 machine witch i use to conect to the laser i cant use text with invill with mij windows 10 machine i kan why

• LightBurn

Robert Evans

2024-01-04

1K

1

0

I’m trying to create a grid of short lines using perforation mode. I’ve staggered the lines since I don’t want them to touch. The vertical lines look on but the horizontal lines, which are parallel, are offset in the preview. I have no idea why. My alternative method will be to m...

• LightBurn

Robert Evans

2024-01-04

1.2K

0

0