Русский

New Progress in Research on Three Lattice Photonic Crystal Surface Emission Lasers at Changchun Institute of Optics and Mechanics

514
2024-03-15 13:54:26
Посмотреть перевод

Recently, Tong Cunzhu, the research team of the Chinese President of Science, Chunguang Institute of Mechanical Mechanics, made important progress in the research field of photonic crystal surface emitting lasers (PCSEL), proposed a three lattice structure and achieved a low threshold 1550nm PCSEL. Relevant achievements were published in Light: Science and Application vol.13, 442024, and the famous international semiconductor industry publication Semiconductor Today cited "Triple lattice photo crystal laser" A news feature report was conducted on the achievement under the title.

"The 1.55 micron range of light transmission through optical fibers has the minimum loss and the advantage of high power safety for the human eye. However, traditional lasers have poor performance due to high inter band absorption in this range. The PCSEL structure can provide strong optical feedback to overcome this problem, reduce the threshold, and improve output power."

Semiconductor Today is headquartered in the UK and is a well-known international magazine and website in the semiconductor industry. It focuses on reporting on important research progress and the latest industry trends in the international semiconductor field, and has a strong industry influence.

PCSEL is currently an important research direction in the field of semiconductor lasers, which can be widely applied in various technical fields such as communication transmission, laser pumping, optical sensing, medical equipment, etc. It is defined as the core root technology by well-known leading companies in the industry. However, due to the large device size and high threshold current, the current PCSEL cannot meet the practical application needs in fields such as high-speed optical communication. This work proposes for the first time the use of a three lattice photonic crystal structure to enhance the optical feedback in the resonant cavity, and based on this, a work on 1.55 has been prepared μ The continuous pumping of InP based PCSEL in the m-band provides a new approach for reducing the size of photonic crystal cavities and lowering device thresholds. It will play an important role in applications such as high-speed optical communication and LiDAR in the future.

Structure and performance of a three lattice photonic crystal surface emitting laser



Source: Sohu

Связанные рекомендации
  • The United States promotes the development of next-generation EUV lithography technology

    LLNL has long been a pioneer in the development of EUV lithography technology.A laboratory located in California will lay the foundation for the next development of extreme ultraviolet (EUV) lithography technology. The project is led by Lawrence Livermore National Laboratory (LLNL) and aims to promote the next development of EUV lithography technology, centered around the laboratory's developed dr...

    01-06
    Посмотреть перевод
  • A new type of all-optical intelligent spectrometer

    Recently, Professor Xu Tingfa's research team from the School of Optoelectronics at Beijing Institute of Technology and Assistant Professor Lin Xing's team from Tsinghua University jointly developed a new type of Opto Intelligence Spectrometer (OIS). The device is based on diffractive neural network technology and achieves precise spectral reconstruction under spatially coherent or spatially incoh...

    2024-07-22
    Посмотреть перевод
  • Researchers use laser doping to enhance the oxidation of IBC solar cells

    Researchers from the International Solar Research Center at Konstanz and Delft University of Technology have discovered a method to pattern the back end of a cross finger rear contact battery, improving its efficiency by making certain parts of the solar cell thicker.Researchers have developed a new technology that enhances oxidation in selected areas by patterning the back or back of IBC solar ce...

    2024-02-20
    Посмотреть перевод
  • Laser cladding method improves the surface performance of parts

    Laser cladding, also known as laser metal deposition, is a process of depositing one material onto another.When the laser beam scans the target surface, metal powder or wire flow is fed into the molten pool formed by the laser beam, thereby producing the required material coating.The laser cladding method improves the surface properties of the parts, such as wear resistance, and allows for the rep...

    2023-12-28
    Посмотреть перевод
  • GeoCue introduces three new TrueView 3D imaging systems

    Earlier this month, GeoCue, a liDAR mapping hardware and software provider, announced the launch of three new products for its TrueView 3D imaging system. These new systems combine laser scanning and high-resolution imaging, including the TV625, TV680 and TV680LR. All three systems are NDAA-compliant.All three systems are designed to be used in conjunction with drones, and the company note...

    2023-08-04
    Посмотреть перевод