In Art Library window there’s an “Import” button. Push that, you can then choose multiple files to import. I’m not sure if there’s a practical limit to how many can be selected.I’ll caution that even if something is packaged as an SVG that it may not really be in laser ready form. Even purchased SVGs may be of lo...

Henry

2023-03-10

821

1

0

Does Lightburn save the calculated cut path optimizations in the file? Can it? Or, does it have to recalculate them every time I run the file? I’m on LB 1.3.01 on Ubuntu 22.04.

Jamie

2023-03-10

966

1

0

As the annual event of the laser, optical and optoelectronic industries in Asia, the 17th Munich Shanghai Optical Expo will be held at 6.1H, 7.1H and 8.1H of the National Convention and Exhibition Center (Shanghai) from July 11 to 13.After two years, exhibitors have an unprecedented enthusiasm for registration, and the exhibition area will ...

David

2023-03-10

735

0

0

Getting cannot find C:\lbexport.aiCant find fix

Payson

2023-03-09

978

1

0

Trying to get Lightburn to work with my fiber laser, can’t get it to find the laser. tried several time to load the driver and it still won’t work. There is a pic of the board that’s in my machine. Can anyone help, Thanks Ron

Terrelle

2023-03-09

917

1

0

Hello, my problem is that i wotked for a short time with lightBurn 1.3.01, after a short time the program stopped working - it does not recognize the device. I tried manually entering the device and the laser started working., but the next day it didn’t again. Can i buy another version of LightBurn and pay the license again, i want my laser t...

Vasili

2023-03-09

782

1

0

I was wondering if the LB devs could make a setting option where a warning message (ack) pops up before starting the engraving, to make sure you updated overlay image. I have bunch of the same designs and I sometimes forget to update overlay. It then gets misaligned.

Clarence

2023-03-09

943

1

0

When I am engraving, I notice that there are missed lines in the text that have not been engraved, they follow the hatch direction. I also use crosshatch and it is still there. I engrave stainless steel and within all the text there are these silver lines. Any ideas. I used a 0.001 hatch.

Nugent

2023-03-09

895

1

0

I am having issues with my machine not jogging to the correct position when I use LightBurn with my Mega V. It homes correctly front left ( looking at the machine). When I try to “set laser position on the program after homing it crashes to the opposite corner. I set up the machine as 885mmx885mm (just under the 35"x35” of the work area...

Christian

2023-03-09

832

1

0

All of a sudden this started happening.My machine zero is lower left.I drag the laser head there before startup as I don’t have homing switches hooked up yet.I position my workpiece on the grid, select laser position to “lower Left” and laser goes there. When I hit “start”, the laser travels back to home zero and tries...

Henry

2023-03-08

719

1

0

I am not sure what the issue is but I had a Jiccoda L1 and switched to the XTool D1 pro and lightburn will not engrave properly. It starts a piece of the project then it either moves up slightly or down from where it started and continues to engrave completely screwing up the project. Also text in the projects are turned upside down and not in the ...

Jamie

2023-03-08

1.1K

1

0

The radius button has disappeared from my screen, I hava reset to default and it still is missing what am i missing?Thank you very much.

David

2023-03-08

1.1K

1

0

I use Lightburn to design various things. However, I’ve been frustrated with the amount of time it takes for Lightburn to show the text on my work area and also when editing text it takes FOREVER! I am using “Footprints in the Sand” verse, so it is a lot of words, but it literally took over an hour typing and waiting for the lette...

Tory

2023-03-08

814

1

0

A question about LightBurn behavior. I made a “coin” that I am going to use as a sort of business card. I got the idea from The Louisiana Hobby Guy video. It cuts out the empty space in the coin and the text is what remains. I’m using the settings below.I created a virtual array of 32 coins. When I first started burning, t...

Abel

2023-03-08

1.2K

1

0

Hi everyone. I’m having an issue in Lightburn when enabling the wobble effect setting. The issue is that the wobble isn’t cutting along the original path line, but rather gravitating toward the bottom of the cut. If I’m not mistaken, the wobble effect must run along the original path line equidistantly.Please see the photo...

Williams

2023-03-08

706

1

0