Laser marking machine is a high-precision and high-efficiency marking equipment widely used in various fields such as marking, engraving, and engraving of materials. When using a laser marking machine, sometimes there may be situations where the LMC cannot be found, and some troubleshooting and handling are needed.Firstly, it is necessary to conf...
2024-04-2893710The misalignment problem of the UV laser marking machine during marking may be caused by various reasons.Here are some suggestions and possible solutions:Check for issues with the machine itself: The accuracy and stability of the laser marking machine may be affected by the quality and performance of the machine itself. Check if the parts of the ...
2024-04-2477010Why is the welding of laser welding machines not firm1. Surface contamination of materialsGenerally speaking, when using a laser welding machine for welding processing, attention should be paid to whether there is dirt on the surface of the material. If materials with dirt are placed in the welding area, the surface of the material will not crystal...
2024-04-2475910With the continuous development of technology, laser cleaning machines have become one of the mainstream products in modern cleaning tools and are increasingly favored by people. In laser cleaning machines, small backpack type laser cleaning machines are increasingly favored by consumers due to their compact and portable characteristics. They use h...
2024-04-19908101. Machine vibrationDuring the cutting process of a laser cutting machine, if it is affected by external factors such as water tanks, exhaust fans, etc., it may generate vibration, resulting in wave marks on the cutting surface.2. Gear slippingThe slippage between the gear and the gear seat may also cause wavy lines on the machined section. ...
2024-04-191.1K10Laser achieves high-precision temperature control through various mechanisms:1) Accurate wavelength control: The laser can be designed to emit light of a specific wavelength, and the wavelength can be adjusted to match the absorption characteristics of the target material. This can precisely control the energy deposited into the material.2) Tight b...
2024-04-1888010Laser engraving is currently widely used in various fields such as molds, signs, hardware accessories, advertising decorations, and automotive parts. Compared to traditional corrosion techniques, laser engraving has extremely high accuracy, achieving a positive or negative 0.1mm or even lower accuracy, and can easily handle difficult to handle righ...
2024-04-1788410The quality of the marked lines or text may deteriorate, and there may be blurry, unclear, or uneven markings.
2024-04-1792610Which color is the best for laser coding?
2024-04-1677010In the field of glass processing, laser cutting technology has gradually become a new favorite in the industry due to its high precision, high efficiency, and environmental protection characteristics. Among numerous laser cutting technologies, ultraviolet laser cutting machines and infrared laser cutting machines have become the focus of the market...
2024-04-1584910Under what circumstances should the output power of the laser cutting machine be increased?
2024-04-12676101. Adjust the machine assembly to improve cutting efficiency.Guide rail: When installing the guide rail, it must be parallel. If the guide rail is not parallel, there will be resistance during the operation and development of the machine equipment. The workpiece designed by cutting will have serrated edges. Therefore, the Y-axis guide rail must ful...
2024-04-1283310If it is a machine, there will be losses, and the same goes for metal material laser cutting machines. In the long-term development and use process, we will definitely affect the existence of some more or less losses, such as slow cutting speed, poor cutting accuracy, and so on. Many people can think that it must be a decrease in laser power. In fa...
2024-04-1277210There are several reasons and troubleshooting methods:1. When the vertical light is incorrect, please adjust the vertical light and readjust the light path if necessary.2. If the focal length is not adjusted properly, please refocus.3. The voltage is unstable, the voltage is low, and the laser current is too small. You need to replace a larger vol...
2024-04-0978810With the continuous improvement of industrial production level, the industrial pollution and waste generated in the production process are also increasing, and more and more cleaning equipment is needed. Traditional cleaning methods have gradually been phased out, and laser cleaning, as a high-tech cleaning method, is increasingly being valued by p...
2024-04-0771110
- Sem Dados
Português
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski