How to select a suitable linear motor module to maintain the stability and efficiency of the equipment.Linear motor selection elements:1. The movement load, the maximum load that can be borne (the safety margin is 80%), and the movement center of gravity deviation.2. Linear motor installation mode: horizontal installation is the best way under the...
2023-03-0244600How do I change the settings in Lightburn so it knows the laser is now twice as powerful
2023-03-0143010Hello I made a circle and drew a line through it and I tried to edit nodes using “t”. It didn’t do anything. Also, it doesn’t seem to allow me to add nodes to circle shapes.
2023-03-0145210Why do I have to flip everything Vertical to get it correct on the surface I am engraving?
2023-03-0137420I am looking for help with my Ruida 6445G Controller. The problem is the Z Axis. I have tried multiple options. Trying to get the Z Axis to show me in mm the actual length is not happening. For 100mm on the Controller is only about 4mm movement. I tried using the Auto calculations of Entering this information and the stepper was set at 0.2 which th...
2023-01-30438112The application of visible laser is very extensive. Some people even say that visible laser is a better light source than LED. However, the main difficulty in its development is how to select appropriate active layer, limiting layer material and corresponding growth process.We know that the 632.8nm He-Ne laser is widely used. He-Ne laser is a gas ...
2023-03-0145600Hi, please help me. I just downloaded lightburn to use on my new laser. I tried so many times, setting and watches video and nothing seems to work. Please help me out.
2023-02-2848110I have seem to lost my selection box in settings for constant power mode ? Its used for cutting and would be nice to know more about it ? I would thank you ! For any help !
2023-02-2831110I noticed that the new version of the software has added the option “Camera is mounted to the laser head”. Regarding this feature, I would like to know the following:1. What specific tasks can this feature help me with?2. What kind of camera do I need to prepare?3. What is the specific usage method of this feature? It would be great if...
2023-02-2834010I have Ortur LM2 Machine. I recently replaced the LU 1-4 module with a Comgrow 20w module. The new module is 63mm square and the LU 1-4 is about 40x42mm. I glued a protrusion on to the side of the new module to hit the x-axis homing switch and it works fine. I relocated the y-axis homing switch to the front rail of the Ortur. It works fine if the m...
2023-02-2848310Why can't the temperature of water-cooled chiller drop? What are the reasons?Who can give me an answer?
2023-02-2834640I have a Nova 24 machine and use lightburn. I have looking over other discussions and this and have tried everything that people have indicated. Any other thoughts on this issue?
2023-02-2833610Because i’m new to this world I make a lot of engrave and material tests. In Lightburn there is a built-in solution to make fast cut test. Thats cool, but I need the same test with filled squares for engrave test. Is it possible to force material test to fill the squares or any option to make fast engrave tests?
2023-02-2839010High-performance commercial laser color printer, due to its high definition and special color, has high requirements for paper, and is used for drum driver. It is necessary to further reduce the speed fluctuation and prolong the service life. Therefore, the transmission device is driven by precision planetary reducer, which has high service life an...
2023-02-2831600Hello I'm designing a CNC diode laser machine that can cut 16-Gauge stainless steel to earn my bachelor's at the university.Since Im new to this enviroment I would like to know how to calculate the power needed to cut that deep, I've searching this forum for answers but all I can find is people estimating 150-500W and not the actual formulas or par...
2023-02-2742040
- Sem Dados
Português
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski