What is the best method for cutting laminated metal plates?When cutting laminated metal plates, it is recommended to use a fiber laser with nitrogen assistance and a dedicated laser grade protective film to achieve the best results. At the same time, the cutting speed and heat input should be balanced according to the finely adjusted process param...
12-0212521Fiber laser cutting machines are known for their extremely high cutting accuracy, but what are their specific processing limits? In fact, such devices can theoretically achieve a minimum micro hole cutting of about 0.1 millimeters, but the actual accuracy that can be achieved is influenced by multiple factors such as material properties, thickness,...
12-0122800By using fiber lasers, combined with high-pressure nitrogen gas as an auxiliary gas, and setting lower power and high focus, metal burns can be effectively avoided when cutting stainless steel and aluminum materials. This process can achieve non oxidizing and clean cutting edges.How do you laser cut without burning?To laser cut without burning, I...
11-2716400Fiber laser cutting machine uses fiber laser as the core light source. The working principle is that the high-energy laser beam generated by the laser is focused and forms a tiny spot on the surface of the workpiece, causing the material to instantly reach a molten or vaporized state in the illuminated area. At this point, automatic cutting of the ...
11-2615800Laser cutting has become the preferred process in the field of carbon steel processing due to its high precision, high efficiency, and wide applicability. However, in order to obtain clean incisions, reduce burrs, and ensure overall cutting quality, it is necessary to carefully optimize the cutting process. This guide will provide key optimization ...
11-1323700Fiber laser cutting technology, with its excellent speed, precision, and efficiency, has become an important pillar in the field of modern metal processing. However, relying solely on the performance of the equipment itself is not enough to ensure continuous clean and high-quality cutting results. To achieve stable and excellent cutting performance...
11-1128400Fiber lasers have the advantages of high precision, efficiency, and versatility, and are widely used in industries such as manufacturing, construction, and packaging. So, what materials can fiber lasers cut?Metal Materials1.Stainless SteelFiber laser cutting excels in processing stainless steel, achieving remarkable cutting depths of up to 0.75 i...
10-24296001. Unstable laser outputUnstable laser output is one of the common faults in fiber lasers, which may lead to unstable processing quality or even processing failure.Possible reasons:(1) Laser lens contamination(2) Poor heat dissipation of laser(3) The laser power supply is unstableresolvent:(1) Timely clean the lenses inside the laser(2) Check if th...
2024-07-2392010Hi, I'm using the Ruida RDC6563 controller for a fiber laser cnc machine with the specifications of a BM110 laser head with auto focus servo. everything is running normally and have done a metal plate cutting test. but there is one issue, the autofocus function on the parameter layer does not work. but servo A axis runs normally on manual jo...
2023-02-181.2K71Order/Invoice ID: Available upon requestIssue Product Name: Cloudray JPT M7 60W MOPA Fiber LaserIssue Description: No included drivers shipped with this unit, nor downloaded from the Cloudray site will install correctly in Win 10 64 bit machine. I have followed the guide many times. All drivers for BJJCZ FBLI-B-LV4 controller error as Code 52 / Uns...
2023-02-2898710I have a project where I have to burn off black paint from a plexiglass. (a transparent scale for a tank with liquid) I got a sheet of transparent, fully clear, not matte, plexiglass (acrylic glass) I spray painted it with black paint (have two choices, from a spray can, of can use an airbrush and paint it with water based acrylic paint, same resul...
2023-03-101K10All, Any pitfalls I should be worried about with fiber lasers? I’m currently running an 80 watt CO2 Omtech and have had good luck with it. Producing some really good stuff. Now, I want to get into metal engraving, mainly firearms. As a backup, do they work well for tumblers? Anyone use them for tumblers as a primary?
2023-02-221.1K20In addition to the appearance structural parts of the foundation, the laser water chiller system mainly includes its internal refrigeration system and control system. The refrigeration system is generally composed of four parts: compressor, condenser, throttle valve, evaporator, etc; The control system includes the control of the compressor, thrott...
2023-02-141.1K00From the successful development of the first laser to the present, the laser is developing in the direction of high power and diversity. What is the future development trend of laser water chiller as a cooling equipment for laser?1、 Diversification.From the initial cooling of CO2, YAG and other traditional lasers to the current cooling of f...
2023-02-1490300
- Sem Dados
Português
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski