The starting point of the cutting pattern is not at the locating point
2022-12-1094710Invalid processing serial number arrangement
2022-12-101K10The bottom of the scanned figure is uneven
2022-12-091K10The camera area displays abnormally or does not display
2022-12-091.1K10The laser light is weak and cannot be controlled
2022-12-091.1K101、 The intelligent control panel of water-cooled industrial water chiller is equipped with ammeter, control system fuse, compressor key switch, water pump key switch, electronic temperature controller, various safety protection fault indicators, and unit startup and operation indicators. The operation is simple and convenient.2、 The high-qu...
2022-12-101K001、 Fault phenomenon: alarm for ultra-high room temperatureCause of fault: The ambient temperature of the chiller is too highTreatment method: improve ventilation and ensure that the operating environment of the chiller is below 40 ℃2、 Fault phenomenon: serious condensation of condensateFault cause: the water temperature is much lower than t...
2022-12-101.1K001. Laser power. There is a threshold of laser energy density in laser welding. If it is lower than this value, the penetration is very shallow. Once it reaches or exceeds this value, the penetration will be greatly improved. Only when the laser power density on the workpiece exceeds the threshold value (related to the material), the plasma will be ...
2022-12-101.2K00Error reporting Communication error
2022-12-081.1K10What is the possible reason for the skew of graphics and characters when cutting?
2022-12-081.1K10How to import your company's information into the software.
2022-12-081K10The size of the cutting figure is different from the actual figure.
2022-12-071.2K10Start up and press the limit switch all the time.
2022-12-0799010The cutting pattern is not closed or the light is uneven.How to solve this problem?
2022-12-061.1K10The Z-axis makes a sound when it rises and falls
2022-12-061.3K10
- Sem Dados
Português
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski