Polski

Shanghai Optics and Machinery Institute has made progress in femtosecond fiber lasers based on twisted Sagnac interferometer mode locking

406
2024-04-22 16:17:22
Zobacz tłumaczenie

Recently, the research team of the Aerospace Laser Technology and System Department of the Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, proposed a torsional Sagnac interferometer and applied it to the fiber laser system, realizing mode locking self starting and pulse shaping. The relevant research achievements were published in the Journal of Lightwave Technology under the title of "Femtosecond fiber laser mode locked by a twisted Sagnac interferometer".

Fiber optic Sagnac interferometers have been widely used in fields such as navigation, sensing, and lasers. The common path structure of Sagnac interferometer has both advantages and disadvantages. One is that precise length control is not required between optical paths, which is crucial for robust interferometric measurements. The second issue is that the transmittance of the Sagnac fiber loop is fixed and cannot be freely tuned. 
Therefore, traditional nine cavity mode-locked fiber lasers based on Sagnac fiber interference loops face the problem of inflexible mode locking.

In this study, researchers proposed a twisted Sagnac interferometer with continuously adjustable phase bias. By introducing 90 ° fusion in the Sagnac loop and utilizing the birefringence of polarization maintaining fibers, linear phase shift differences in clockwise and counterclockwise directions can be introduced and adjusted. When applied in a nine cavity fiber laser system, setting an appropriate transmittance can achieve mode locking self start. The experimental results show that by stretching the fiber to change the linear phase shift difference, the laser can achieve switching between different operating modes. By optimizing the phase shift difference, laser pulses with a spectral bandwidth of 31nm and a pulse duration of 160 fs can be generated at a repetition frequency of 24.5 MHz.

This study achieved real-time continuous adjustment of the transmittance of Sagnac fiber optic interference ring, providing greater flexibility and control for the nine cavity mode-locked laser, and improving its application prospects in optical metrology and sensing fields.
This work was supported by the Youth Innovation Promotion Association of the Chinese Academy of Sciences, the National Natural Science Foundation of China, and the Shanghai Natural Science Foundation.

Figure 1 Schematic diagram of a twisted fiber Sagnac interferometer.

Figure 2: Experimental setup diagram of femtosecond fiber laser based on twisted fiber Sagnac interferometer mode locking.

Figure 3 Spectral tuning and time-domain characteristics under different clockwise and counterclockwise linear phase shift differences and nonlinear phase shift differences.

Source: Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences

Powiązane rekomendacje
  • Scientists have used 3D integration technology to bring ultra-low noise lasers without isolators to silicon photonics

    After electronic integrated circuits (Eics), silicon (Si) photonics technology is expected to achieve photonic integrated circuits (PIC) with high density, advanced functions and portability. Although various silicon photonics fountifiers are rapidly developing PIC capabilities to enable mass production of modulators, photodetectors and, more recently, lasers, silicon PIC has not yet met the strin...

    2023-08-04
    Zobacz tłumaczenie
  • The LiDAR SLAM navigation system uses laser sensors to realize real-time 3D mapping of the environment

    Robotic lawn mowers are becoming increasingly popular due to their convenience and ability to save time and effort. Although robotic lawnmowers have made significant progress over the years, many robots still require users to lay perimeter wires to define the mowing area and remove any obstructions from the lawn to ensure the mower doesn't get stuck or damaged.Well, that's not the case with the Ne...

    2023-09-11
    Zobacz tłumaczenie
  • Van's updates the manufacturer of laser-cut parts

    Van's Aircraft has responded to reports of ruptured dented parts found in AirVenture's latest kit. These defects are caused by external suppliers changing the process of laser cutting parts. From February 2022 to June 2023, Van's moved some parts from traditional punch manufacturing to an outside supplier that can laser cut rivet holes. The move is designed to increase the company's throughput and...

    2023-08-04
    Zobacz tłumaczenie
  • Making Infrared Light Visible: New Equipment Utilizes 2D Materials to Convert Infrared Light

    Infrared imaging and sensing technology can be used in various fields, from astronomy to chemistry. For example, when infrared light passes through a gas, sensing changes in light can help scientists identify specific properties of the gas. The use of visible light may not always achieve this sensing.However, existing infrared sensors are bulky and inefficient. In addition, due to the use of infra...

    2024-06-24
    Zobacz tłumaczenie
  • It is said that laser additive manufacturing is good, but what is the advantage?

    When it comes to additive manufacturing, some people may not have heard of it, but when it comes to its other name: 3D printing, no one is unaware.In fact, the name 'additive manufacturing' better illustrates the essence of this processing method. From ancient times to the present, humans have put in great effort to achieve the goal of processing 'raw materials into the shapes we need'. From the S...

    2023-11-08
    Zobacz tłumaczenie