chanelink logo
CHANELINK
Polski

Eoptolink launches optical transceivers for immersion cooling

494
2024-03-26 14:12:09
Zobacz tłumaczenie

Eoptolink Technology has expanded its product portfolio to meet the new market of optical transceiver modules operating in environments using immersion cooling.

The Eoptolink EOLO-138HG-5H-SYMR is an optical transceiver for the 800G OSFP DR8, which can be completely immersed in a 2-phase liquid cooling environment. The EOLO-138HG-02-SYMR is an 800G OSFP DR8+. This transceiver has fiber optic tail fibers that can be connected to non flooded infrastructure. Immersion cooling solutions are a growing niche market as they significantly reduce the energy required to cool data center equipment, thereby lowering operating costs. At the same time, the working temperature of network devices and their sub components is lower, which prolongs their service life and reduces the failure rate.

"We are delighted to showcase our 800G OSFP DR8 module for immersion cooling at OFC," said Supriyo Dey, Vice President of Business Development at Eoptolink Technology. As the growing demand for computing power drives power consumption and cooling in data centers, server and GPU infrastructure is infiltrating immersive cooling. Immersive cooling is not a new technology, but now may be a good time to break through.


In the past few years, data centers and artificial intelligence/ML optical devices have been driven by cost per bit reduction, which has led to the widespread adoption of unsealed design methods. But these methods are not suitable for immersion cooling environments. "We had to redesign our optical solution from scratch," said Dirk Lutz, an engineer at Eoptolink Technology. We have redesigned the optical engine and solved technical challenges while maintaining cost parity. Now, we are proud to be able to achieve immersive cooling for 800G interconnect applications.


The on-site demonstration of the OSFP 800G DR8 module will be held at Eoptolink booth # 3127 at OFC 2024 in San Diego, California.

Source: Laser Net

Powiązane rekomendacje

  • Electron beam welding process for thick steel plate of turbine at Aachen Institute of Technology in Germany

    Researchers from the Welding Research Institute of Aachen University of Technology in Germany reported on the development of a stable welding process for electron beam welding of thick plates used in the construction of offshore wind turbines. The relevant research results were published in Materials Science and Engineering Technology under the title "Development of a robust welding process for el...

    2024-07-09
    Zobacz tłumaczenie

  • Research progress and prospects of CFRP laser surface cleaning

    Researchers from Materials Science at Harbin Institute of Technology, Zhengzhou Research Institute at Harbin Institute of Technology, and Key Laboratory of Microsystems and Microstructure Manufacturing at Harbin Institute of Technology, Ministry of Education, reviewed and reported on the research progress of laser surface cleaning of carbon fiber reinforced polymer composites (CFRP). The relevant ...

    03-06
    Zobacz tłumaczenie

  • Medium-long wavelength infrared quantum cascade laser of MOCVD on silicon

    Us researchers report 8.1 μm wavelength quantum cascade laser (QCL) grown on silicon (Si) by MOCVD [S. Xu et al., Applications. Physics Letters, v123, p031110, 2023]. "There are no previous reports of QCL growth on silicon substrates by metal-organic chemical vapor deposition (MOCVD)," commented the team from the University of Wisconsin-Madison, the University of Illinois at Urbana-Champaign an...

    2023-08-04
    Zobacz tłumaczenie

  • Van's updates the manufacturer of laser-cut parts

    Van's Aircraft has responded to reports of ruptured dented parts found in AirVenture's latest kit. These defects are caused by external suppliers changing the process of laser cutting parts. From February 2022 to June 2023, Van's moved some parts from traditional punch manufacturing to an outside supplier that can laser cut rivet holes. The move is designed to increase the company's throughput and...

    2023-08-04
    Zobacz tłumaczenie

  • The Trends and Challenges of the Metal 3D Printing Industry in 2025

    In the past decade, metal 3D printing technology has experienced rapid development, from the initial production of orthopedic implants to the manufacturing of rocket boosters. This technology has become an indispensable part of multiple key industries. With the advancement of technology and the expansion of the market, we are witnessing the revival of electron beam melting (EBM) technology and the...

    01-21
    Zobacz tłumaczenie