chanelink logo
CHANELINK
Polski

High sensitivity visualization of ultrafast carrier diffusion using a wide field holographic microscope

750
2023-12-25 14:16:07
Zobacz tłumaczenie

A sketch of the imaging and holographic parts of a transient holographic microscope, including a pulse sequence, to illustrate the signal modulation method. By imaging the pinhole array at the sample position, a diffraction limited excitation spot array can be created, allowing for the simultaneous collection of transient data around 100 excitation spots.

Femtosecond transient microscopy is an important tool for studying the ultrafast transport characteristics of excited states in solid samples. Most implementations are limited to photoexcitation of a single diffraction limit point on the sample and tracking the temporal evolution of subsequent carrier distribution, thus covering a very small sample area.

Recently, scientists from Italy and Spain have demonstrated how to construct an all optical phase-locked camera by using off-axis holography, significantly increasing the field of view of ultrafast microscopes. The camera decouples the signal demodulation speed from the maximum detector frame rate.

In this original work published in the journal Ultrafast Science, researchers demonstrated simultaneous transient imaging of dozens of individual nanoobjects, with the entire field of view excitation being desirable. It is not yet clear how to apply new holographic techniques in solid-state samples that require diffraction limit excitation. Ideally, a diffraction limited excitation point array covering the entire field of view will be generated, so that multiple points in the large sample area can be detected simultaneously.

The article "High sensitivity visualization of ultrafast carrier diffusion using a wide field holographic microscope" demonstrates how to achieve this feature by imaging a pinhole array at the sample position. This not only helps to obtain statistical information about sample photophysics, but also for uniform samples, the signals of all light spots can be averaged, greatly improving the signal-to-noise ratio.

Source: Laser Net

Powiązane rekomendacje

  • Observation of nanoscale behavior of light driven polymers using combination microscopy technology

    Expanding our scientific understanding often boils down to observing what is happening as closely as possible. Now, researchers from Japan have observed the nanoscale behavior of azo polymer films and triggered them with lasers.In a study published in Nano Express last month, researchers at Osaka University used a combination of cutting-edge scanning high-speed atomic force microscopy and optical ...

    2024-03-12
    Zobacz tłumaczenie

  • Hyperspectral imaging technology: a comprehensive guide from principles to applications

    Hyperspectral imaging technology is a highly anticipated innovation in the field of science and engineering today. It not only integrates spectroscopy and imaging technology, but also has wide applications in various industries and research fields. This article will delve into the basic principles, working mechanisms, and applications of hyperspectral imaging in different fields.Introduction to hy...

    2024-04-16
    Zobacz tłumaczenie

  • UCI Cinemas collaborates with The Marvels to launch its new 4K laser projector

    Cinemas are in a developmental stage. Their roles are changing and the rules are being rewritten. Many people have proposed a way to make cinemas a truly unique place by providing audiences with a higher quality experience. It is along this route that UCI Cinemas continues to move forward. In recent days, it has officially launched a 4K laser projector and had a special date with the new MCU movie...

    2023-11-14
    Zobacz tłumaczenie

  • Scientists develop photo activated glass for clean energy production

    Japanese and Swiss scientists have collaborated to develop glass that can generate electricity under light, which may pave the way for sustainable energy production. Researchers from Tokyo Institute of Technology and the Swiss Federal Institute of Technology in Lausanne used femtosecond lasers to etch circuits on glass surfaces, resulting in the unexpected generation of semiconductor crystals.The ...

    2024-03-11
    Zobacz tłumaczenie

  • New technology from Swedish universities enables real-time laser beam forming and control

    Dr. Yongcui Mi from Western University in Sweden has developed a new technology that enables real-time laser beam shaping and control for laser welding and directional energy deposition using laser and metal wire. This innovative technology draws on the mirror technology used in advanced astronomical telescopes.Adaptive beam shaping using deformable mirror technology (Image source: Western Univer...

    2024-12-19
    Zobacz tłumaczenie