Polski

The new method can maintain beam quality while significantly improving the power of fiber lasers

848
2023-12-22 14:25:39
Zobacz tłumaczenie

The new discovery by optical scientists has brought new vitality to fiber lasers. This innovative method significantly improves the power of lasers without reducing beam quality, and will become an important defense technology for future low-cost drones and remote sensing.

The research teams from the University of South Australia, the University of Adelaide, and Yale University have demonstrated new applications of multimode fibers, successfully increasing the power of fiber lasers by 3 to 9 times while maintaining beam quality, enabling them to focus on targets from a long distance.

This important research achievement was published in the journal Nature Communications, and the breakthrough stimulated Brillouin scattering (SBS) suppression and output focusing schematic diagram showcases its technical principles.

This innovative technology excites multiple modes in multimode fibers, significantly increasing the SBS threshold power. The core lies in generating diffraction limited light spots near the fiber output by modulating the relative phase of the fiber mode, and producing a focusing effect through lens collimation.

Researchers say that this new method will bring extremely high power output to fiber lasers, which will be widely used in fields such as defense industry, remote sensing applications, and gravitational wave detection, bringing unprecedented benefits for future development.

In response to the popularity of low-cost drones in modern battlefields, high-power fiber lasers are particularly important. It has the advantages of extremely low single launch cost and light speed operation, which can resist large-scale drone attacks, maintain the launch capability of military assets and vehicles, and ensure the execution of critical combat tasks.

This advanced technology not only has potential deterrent effects in the field of defense, but also aligns with the goals of defense strategic assessment and AUKUS Pillar 2.

Dr. Ori Henderson Sapir, a researcher at the Institute of Photonics and Advanced Sensing at the National University of Australia, stated that Australia has a long history of innovative fiber optic technology, which will put it in a world leading position in developing the next generation of high-power fiber lasers, not only limited to the defense field, but also contributing to new scientific discoveries.

Source: Laser Net

Powiązane rekomendacje
  • Investing nearly £ 520 million, this synchrotron light source in the UK will be upgraded

    Recently, the UK's national synchrotron "Diamond Light Source" announced an investment of nearly £ 520 million ($648.3 million) to implement three new flagship beam lines and upgrade existing beam lines. This comprehensive upgrade will be delivered by 2030.The Department for Science, Innovation, and Technology and the biomedical charity Wellcome jointly approved the facility upgrade project,...

    2023-09-27
    Zobacz tłumaczenie
  • MIT researchers have demonstrated a novel chip based resin 3D printer

    Researchers from the Massachusetts Institute of Technology and the University of Texas at Austin showcased the first chip based resin 3D printer. Their concept verification tool consists of a millimeter sized photon chip that emits a programmable beam of light into resin holes, which solidify into a solid structure when exposed to light.The prototype processor does not have mobile components, but ...

    2024-06-17
    Zobacz tłumaczenie
  • Zhejiang University has prepared ultra strong and tough 3D printing elastic materials

    Professor Xie Tao and researcher Wu Jingjun from the School of Chemical Engineering and Biotechnology at Zhejiang University have designed a new type of photosensitive resin and used it to create a "super rubber band" that can stretch to over 9 times its own length and lift 10 kilograms of objects with a "body" with a diameter of 1 millimeter through 3D printing. The relevant results were recently...

    2024-07-06
    Zobacz tłumaczenie
  • Scientists build high-power cladding-pumped Raman fiber laser in 1.2 μm band

    Laser sources operating in the 1.2 μm band have some unique applications in photodynamic therapy, biomedical diagnostics, and oxygen sensing. In addition, they can be used as pump sources for mid-infrared optical parameter generation and visible light generation through frequency doubling.Laser generation in the 1.2 μm band has been achieved by different solid-state lasers, including semicon...

    2024-01-31
    Zobacz tłumaczenie
  • This laser cleaning "dark horse" announces annual performance and shareholder information

    On April 15th local time, Laser Photonics, a developer of laser cleaning equipment and solutions, announced its financial results for the fourth quarter and the year ended December 31, 2023. The financial report shows that in the fourth quarter of 2023, its revenue was $800000, with reduced operating and net losses. Here are the specific data:In addition to the financial report, the company's CEO ...

    2024-04-16
    Zobacz tłumaczenie