Hello ,I use lightburn for quite some time , awesome piece of software.Although I like it and i use it very much , for the love of God and all the Angels in the heaven why is it so hard to put a lead in on the inside of a rectangle or other shapes. On circles is super easy , just put a negative angle , length and presto , inside lead in.On ...

Keegan

2023-08-21

1.1K

1

0

have a k1 36 watt,power led bar registered full power when lightburn was set to 100%but now machine laser head output led bar is only showing 75-80 %

Marshall

2023-08-21

1K

1

0

Just a quick, simple question for this. I didn’t want to ruin it by experimenting to see what works best.I have to raise the laser on my D1 Pro 20w for it to go over the lip of this tray. Should I adjust the power and/or the speed to accommodate the lift?

Tory

2023-08-15

952

2

0

I have downloaded the trial version of the program.I followed the set-up instructions including the import file from XTool and the first video tutorial yesterday and got a cute little key ring.Then later went back to do some more work and computer would not work with software.Showed I was disconnected from the XTool D1 Pro.Even th...

Christian

2023-08-17

1.1K

1

0

Hi, Can anyone give me a hint as what is going on here? for an unknown reason my gantry crashed in the top frame of my laser( Falcon 2 22w ) and since then it refuses to frame correctly it sometimes behaves like the laser frame is upside down ! or way over to the right! or over to the left, in frustration I reloaded my Prefs from previous save, no ...

Patrick

2023-08-17

776

1

0

Hello, I just upgrade my software to 1.4.01 and now my machine never ends a cut as get frozen on M2 command. The progress bar says busy and the timer keeps counting. If I press the stop button manually it doesn’t do anything and the machine is always on busy. I cannot move or home or anything. Does someone knows how can I solve this.

Liam

2023-08-17

880

1

0

Hello Everyone,First, I did conduct a search here and did not find an answer that solved my issue (wanted to make sure you knew that). :grinning:After switching from upper right origin to lower left origin in Device Settings, text is upside down and backwards and the Job Origin is not where I select it to be.Using Lightburn 1.4.01 on a Mac Studi...

Darren

2023-08-16

997

1

0

I’m a newbie to this software.Can I use a barcode scanner to read barcodes directly into Lightburn?I am not trying to create a barcode but read an existing barcode and put the characters in to Lightburn.

Cyril

2023-08-16

939

1

0

Hi there, I have a fiber laser 60w JPT, I recently sttarted using it and dont have much experience, I tried engraving a mug, and found that the image was stretched accross half the diameter of the mug, It would seem that the speed of the rotary may be a problem but not sure how to set or correct this to suit.

Gilbert

2023-08-16

956

2

0

HelloI no longer have the color palette on my software at the bottom of the page I can not find it anywhere in the tabs impossible to use my laser cutting thank you for your help.

Clarence

2023-08-16

740

1

0

HII have an Atomstack A10 Pro with 10w laser.I’ve seen videos on youtube that cuts 10mm plywood at a speed of 200 and a power of 80% with 3 passes but I can’t even cut 6mm.Could it be some Lightburn setting?

David

2023-08-15

861

1

0

I am having trouble with multiple things with Lightburn recently. I am getting “waiting for connection” and error:5 Homing cycle is not enabled in your Grbl settings. How can I fix this?

Marshall

2023-08-15

784

1

0

hi all I have a neje master 2 plus laser and using lightburn but totally new too this .so ive installed neje driver correctly then lightburn has auto found laser and input limits correctly ye .now I write text on screen and say centre this but when I go to engrave the laser just goes to the end fully then starts engraving how do I get this in corre...

roy

2023-08-14

929

1

0

Hi guys ,This is my first print.But I think that there is something wrong.The software was downloaded from lightburn and still on trial version.I´m mising something ?Thank you

Liam

2023-08-14

925

1

0

I have a Ortur LM3 and just noticed that after the latest Lightburn and Ortur updates I’m now getting out of round or misaligned burns. I’ve retentioned both the x and y belts and the error has remained consistent after multiple attempts. Based on the fact that after multiple attempts at adjusting the tension and having the problem rema...

Jen

2023-08-14

892

1

0