The main reasons for the loss and insufficiency of system pressure in the hydraulic transmission system are as follows:The power of the hydraulic pump is small, the rotating speed is not up to standard, and the steering direction of the hydraulic pump is incorrect;The valve core is jammed, resulting in unloading;The oil temperature exceeds ...

Williams

2023-02-17

992

0

0

Hydraulic transmission is a widely used transmission mode in modern machinery manufacturing industry. Compared with other transmission modes, hydraulic transmission has certain advantages in some aspects, such as transmission and operation, and it can be applied to many equipment in various machinery industries, such as injection molding machines a...

Smith

2023-02-17

1.1K

0

0

In the Multi-access Laser Micromachining System, lasers can be selected to be optimized for both tasks, with the shared workstation elements of part positioning, control and automation delivering highly precise machining of a vast array of materials.LPI (LP Information)' newest research report, the "Multi-Access Laser Micromachining Industr...

roy

2023-02-17

862

0

0

Xaba’s manufacturing platform will provide intelligence to industrial robots and machines enabling innovative manufacturing processesTORONTO--(BUSINESS WIRE)--Xaba, developers of the first AI-driven robotics and CNC machine controller, today announced it has closed a round of seed funding to bring to market AI-driven fabrication proce...

Cyril

2023-02-17

903

0

0

1. Initialization parametersInitialize parameters before wiring. On the control card: select the control mode; Clear PID parameters to zero; When the control card is powered on, the enable signal is turned off by default; Save this state to ensure that the control card is in this state when it is powered on again.On the servo motor: set the...

Cyril

2023-02-16

942

0

0

What work needs to be done before starting the servo motor1) Measure the insulation resistance (not less than 0.5M for low-voltage motors).2) Measure the power supply voltage and check whether the motor wiring is correct and whether the power supply voltage meets the requirements.3) Check whether the starting equipment is in good condition.4)...

roy

2023-02-16

1K

0

0

Daily maintenance of laser water chiller:1) Place the water chiller in a cool and ventilated place. It is recommended that the temperature be below 40 ℃. When using the laser chiller, the machine room should be kept clean and well ventilated, and the condenser should be cleaned regularly to ensure the normal operation of the unit.2) The wat...

jessie

2023-02-16

1K

0

0

Laser chillers are often used to cool UV lasers, CO2 laser glass tubes, semiconductor lasers, CO2 RF tube lasers, and fiber lasers of cutting machines, marking machines, engraving machines, and other equipment. Users can select suitable chillers according to different laser power. The installation and use of the laser chiller is very simple. The fi...

Payson

2023-02-16

862

0

0

1. Control temperature changeControlling the change of hydraulic temperature leakage in the process of various hydraulic power systems is an effective control measure to effectively control the leakage of hydraulic power transmission systems. From the control of the pipeline temperature of the oil tank and the pneumatic hydraulic press, control the...

Abel

2023-02-16

960

0

0

The overflow leakage of parts in mechanical hydraulic power transmission system is mainly divided into two types: the internal part overflow leakage and the internal overflow leakage of main engine parts.The overflow leakage of internal components mainly occurs in the hydraulic cylinders such as the drive hydraulic valve, hydraulic pump, hy...

Aaron

2023-02-16

1K

0

0

I power laser on and it only displays connecting to controller. I have disconnected the him from the controller and nothing homes. I have led 15 and 12 lit up with eithernet discounted. Homing switches work chiller input works and all drives are good no faults. Any ideas?

UbA2UsgJ

2023-02-02

1.2K

2

0

With the temperature getting hotter and hotter, the requirements of the processing plant for industrial refrigerators have been continuously improved. Our refrigerator equipment has created this new type of refrigerator with high performance, large output power and very good cooling effect in order to meet the strong suggestions of many customers....

Terrelle

2023-02-15

829

0

0

The servo in the industrial control industry is generally the abbreviation of AC servo system. At the project site, the servo we refer to is the servo driver. However, servo driver and servo motor are an inseparable system, and they are connected by encoder cable and power cable. Generally, the servo driver bears the control command of the controll...

Terrelle

2023-02-15

1.1K

0

0

How does the PLC control the servo motor to automatically move left and right The servo motor drives the linear module to move from the left to the right and then automatically returns

Narrator

2023-02-15

878

1

0

Introduce three control modes of servo motorIf you have no requirements for the speed and position of the motor, just output a constant torque, which of course is torque mode.If you have certain accuracy requirements for position and speed, but you don't care much about real-time torque, it is better to use speed or position mode.If the up...

Aaron

2023-02-15

1K

0

0