RDC6442 stuck at connecting to controller

UbA2UsgJ

Kategorie:

Ruida

1.2K

Zobacz tłumaczenie

2023-02-02

I power laser on and it only displays connecting to controller. I have disconnected the him from the controller and nothing homes. I have led 15 and 12 lit up with eithernet discounted. Homing switches work chiller input works and all drives are good no faults. Any ideas?

Jack Wilborn

2023-02-02
```
Is there a problem with the driver software?
```
Zobacz tłumaczenie

0

Odpowiedz
Ethan

2023-02-15
```
The cables to the homing switches
```
Zobacz tłumaczenie

0

Odpowiedz

Relewantne rekomendacje

Śledź

Zbierz

Zgłoś

RDC6442 stuck at connecting to controller

Press the test key ".", the cutting head is in the following state, but the jitter is large.

The size of the cutting figure is different from the actual figure

Using "partition for over range"

Setting the cutting point is invalid.

When the capacitance is calibrated, it still moves downward when touching the metal plate.