Nederlands

Creativity Falcon 2 laser cutting machine will be launched in Germany equipped with a new 60W laser head

205
2024-05-29 14:50:08
Bekijk vertaling

Starting from June 20th, The Creativity Falcon 2 laser cutting machine will also be launched in Germany, equipped with a new 60W laser head. With this ability, fully encapsulated equipment can now also be carved into steel.

 


High power is achieved through twelve 5-watt laser diodes, whose beams are combined with each other. This will make it possible to cut 22mm thick lime wood and 30mm thick organic glass. According to the manufacturer, stainless steel plates can not only be carved but also cut 0.2 millimeters thick. For example, by turning off a single diode (through software), the laser power of sensitive materials can also be reduced. The cutting machine should belong to Laser Class 1.

For thinner materials, it is said that the cutting speed of the new laser head is more than three times faster, for example, the cutting speed of 5mm walnut plywood can reach up to 700 millimeters per second. Due to its high power, the material evaporates faster, resulting in almost no smoke generated at the cutting edges.

The shell comes with a prominent orange transparent cover, providing safety features in case of accidental opening. There is also a drawer at the bottom that can collect cutting waste and is easy to clean. The 1.6W laser head is also equipped with a laser cutting machine, which is said to be more suitable for fine carving.

Falcon2 60W is now available for booking with a discount of over 400 euros. At that time, its price was only 2439 euros, not 2872 euros. In addition to the second laser head, an air assisted compressor is also provided.

Source: Laser Net

Gerelateerde aanbevelingen
  • Due to breakthroughs in microchip photonics, microwave signals have now become very accurate

    Zhao Yun/Columbia Engineering Company provided an advanced schematic of a photonic integrated chip, which aims to convert high-frequency signals into low-frequency signals using all optical frequency division.Scientists have built a small all optical device with the lowest microwave noise ever recorded on integrated chips.In order to improve the performance of electronic devices used for global n...

    2024-04-01
    Bekijk vertaling
  • A major investment! Lumentum completes acquisition of research and development site in Carswell, UK

    Lumentum, a leading designer and manufacturer of innovative optical and photonic products, has announced that it has completed the acquisition of a site in Caswell, UK.Lumentum revealed that it has made significant investments in the site over the past two years and is currently undergoing development upgrades for its state-of-the-art cleanrooms and laboratories to continue to support the developm...

    2023-09-13
    Bekijk vertaling
  • Nat. Commun.: Two color orthogonal polarized organic light-emitting diode

    In recent years, linearly polarized organic light-emitting diodes have greatly enriched the application scenarios of polarization optics and optoelectronics industries. The low-cost and large-area preparation of linearly polarized organic light-emitting diodes with high polarization, strong directional emission, narrow bandwidth, and multi-color adjustability is an important challenge in the curre...

    2024-02-29
    Bekijk vertaling
  • Innovative laser based rain enhancement project launched by UAEREP and DERC teams

    Recently, the UAE Rainfall Enhancement Scientific Research Program launched a groundbreaking project with Dr. Guillaume Matras and his team from the Directional Energy Research Center of the Institute of Technology Innovation, aiming to address the challenge of global water shortage through advanced technology. This collaboration marks an important milestone in the field of rainfall enhancement sc...

    2024-03-02
    Bekijk vertaling
  • Laser technology reveals hidden gases in complex mixtures

    Laser Network reported on January 11th that modern equipment has been fine tuned to detect highly specific gases, including trace gases found in the atmosphere, gases present in combustion exhaust emissions, and gases used in technology plasma applications.They achieve this by calculating the percentage of light at a certain wavelength that is absorbed or attenuated by the sample. This way, the co...

    2024-01-11
    Bekijk vertaling