Connect RDC6563FG laser controller with Maxphotonics MFSC 1500X laser!I made the connections according to the following pictures.Shutter opens and laser turns on too, but I can't change the power. Can someone help me with what I might be doing wrong?Or do I have to do something special (adjust) in the setting of the RDC6563fg? Thanks for you...
2024-05-0653710Pneumatic transmission is a fluid transmission that uses compressed gas as the working medium and transmits power or information through the pressure of the gas.Advantages:1) Using air as the working medium, it is relatively easy to obtain the working medium. After use, the air is discharged into the atmosphere, which is convenient to handle. Com...
2024-05-06533111.When the power to weight ratio requirement is high, hydraulic transmission should be used because the working pressure of the hydraulic system can be higher (such as 32MPa or higher), so the corresponding transmission power to the weight ratio of the actuator (hydraulic cylinder, hydraulic motor) is larger. The ratio of the power that can be tran...
2024-05-0649910Gear reducer is the abbreviation for reduction motor, a widely used reduction equipment that can be divided into gear reducer, planetary reducer, right angle reducer, and worm gear reducer according to the gear transmission method; Divided into high-power reducers and low-power reducers according to power size; According to the accuracy level, it i...
2024-05-0646810hi, does anyone knows why the follow sensor doesnt work until I approach manually the metal plate to the nozzle head? Thanks so much!
2024-05-0352110Hydraulic transmission technology, as an important industrial technology, has always been closely related to previous industrial revolutions in its development process.However, under the new development background, the integration of hydraulic transmission technology with industry and manufacturing has undergone significant changes compared to be...
2024-04-3047511Variable frequency motor refers to the general term for motors driven by frequency converters. Variable frequency speed regulation is currently replacing traditional mechanical speed regulation and DC speed regulation schemes with fast speed due to its advantages such as high efficiency, wide speed regulation range, high accuracy, smooth speed regu...
2024-04-3048210In the industrial field, there are usually two auxiliary cooling methods for laser equipment: water-cooled and air-cooled. In practical applications in the industrial industry, the commonly used ones are water-cooled. That is what we know as a chiller. The chiller can provide timely cooling for laser equipment under high temperature and heat condit...
2024-04-3048210Hello, maybe someone can help me, after a long time I finally managed to get the Z axis to work. But when adjusting the height, the Z moves down to the material and as it approaches it also moves away, but does not return to the desired height. What am I doing wrong please help. Greetings Matthias
2024-05-0154110Bitte um Hilfe, kann mir jemand die Verbindung zwischen RDC6563FG mit Fuji Alpha smart PlusZeigen . Wird für die Z-Achse benötigt alles versucht, aber so wie im Bild stimmt nichtFFA und FFB sind doch Ausgänge und kein Eingang !Please help, can anyone tell me the connection between RDC6563FG with Fuji Alpha smart PlusS...
2024-04-1855920Hi,I have a RDC6563FG-LITE and the Manual is only in chinese and has not been translated to EN, I have used a translating service to translate the PDF but the translation is lacking and I have some questions about the controller.2.4 - RS232 The RS232 serial port is mainly used to control fiber lasers. The interface definition is as shown in the fol...
2024-04-2962840Ultra fast laser refers to a laser with a very short pulse width. Compared to ordinary laser, ultra fast laser has a smaller thermal impact on the material due to its short pulse width, and the deformation generated can be almost ignored. Therefore, it can achieve higher precision laser processing. At present, the application of ultrafast lasers is...
2024-04-2952610A helical gear is a common mechanical transmission component, whose gear tooth surface is at a certain angle to the axis, which is called the bevel angle. Helical gears can mesh with gears with the same bevel angle to achieve transmission rotation. The tooth surface design of helical gears generally adopts a circular arc shape, which makes the mesh...
2024-04-2947710What is the difference between variable frequency motors and variable speed motors?
2024-04-2952910Laser marking machine is a high-precision and high-efficiency marking equipment widely used in various fields such as marking, engraving, and engraving of materials. When using a laser marking machine, sometimes there may be situations where the LMC cannot be found, and some troubleshooting and handling are needed.Firstly, it is necessary to conf...
2024-04-2853710
- Geen gegevens
Nederlands
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski