Laser cutting of thick steel plates has become a part of daily manufacturing, but laser cutting of thick plates still faces some challenges: energy must penetrate deeply, molten material must be cleanly discharged, and the cutting edge must remain stable over long distances. The following are the main challenges faced by the workshop and mature sol...

Miller

een dag geleden

42

1

0

I am getting a buffer message after pressing the start button. How do I clear it?

Tory

2 dagen geleden

60

2

0

What is the best method to carve a white effect on glass using a 10W diode? What is the best way to achieve similar results using fast, high-power, low-speed, and low-power?

Nugent

een dag geleden

11

1

0

1. Diagonal cutting of metal pipesDiagonal cutting on metal pipes usually refers to oblique cutting at the edge of the pipe, rather than vertical (90 degree) cutting. Diagonal cutting is usually done at a 45 degree angle, but can also be adjusted to other angles depending on the application. This cutting method can achieve precise connections, espe...

Darren

een uur geleden

3

0

0

I've been working with a Wattsan 0503 with the Ruida RDC6445S controller for 3 years and suddenly my machine has a problem. I turned to the reseller in the EU, but until today have gotten no solution so I turn to you. When I try to burn a simple test file, no matter how (Lightburn, RDWorks or as RD copied into memory), the controller displays onl...

0880C1A8

09-29

335

17

0

I am upgrading the 10 watt laser to 40 watts. Both are diode lasers. I carved on maple and hardwood with a 10 watt laser at a speed of 1500 millimeters per minute and a power of 30%, and the effect was very good.When I receive a 40 watt machine, should I maintain the same processing speed per minute and only reduce the power by 1/4? That is to say,...

Christian

10-17

101

2

0

When I use lightburn, making a 10mmx10mm square really draws me a 18mmx18mm square, and I don’t know how to correct it.

Abel

3 dagen geleden

62

1

0

1. Introduction to the Flying Cutting Function of Laser Cutting MachineWhen laser cutting circular or parts with circular inner holes, the cutting method of moving the laser head from one part to another without lifting the head is called flight cutting, which can significantly improve cutting efficiency.2. Different Types of Laser Fly Cutting Fun...

Gilbert

2 dagen geleden

58

0

1

Can you give me some advice on paper carving? Less power? The main logo is a bit transparent, so we need a 'burnt paper'. Burning it will dirty the paper. Do you have any good ideas?

roy

10-16

103

2

0

In the metal manufacturing industry, laser cutting has become the default choice. Mastering the process control of laser cutting stainless steel and carbon steel can improve production efficiency and part quality.Choose the right laser family for the jobTwo laser technologies dominate industry use: fiber lasers and CO₂ lasers. For most modern shop...

Jen

3 dagen geleden

83

0

0

I want to use a metal plate to make a laser bed. What is the size of the hole?

Aaron

10-15

112

2

0

1. Introduction to laser cleaning parametersIn the application of laser cleaning, setting reasonable parameters is a key factor determining cleaning efficiency, surface quality, and overall process stability:WavelengthWavelength is the basic parameter for the interaction between the laser and the material being cleaned, and it directly affects the...

Marshall

10-17

78

0

0

How to use multiple cutting heads simultaneously with RDWorks? I can only use one cutting head at a time. What settings am I missing? This is a four head CNC laser cutting machine with servo motor.

Henry

10-14

178

2

0

I want to cut 15 mm and 18 mm plywood with my laser. Iv not been able to find the right speed and power to cut thru 15 mm and 18 mm plywoods.please help and tell what power and speed should I set to trhu these thicknesses without harming my laser.

Terrelle

10-11

192

3

0

In laser welding, the welding penetration depth (the depth at which the base metal completely melts and fuses) and aspect ratio (the ratio of weld depth to width) determine the quality and performance of the weld seam. Therefore, when analyzing and optimizing laser welding processes, weld penetration depth and aspect ratio are not only key indicato...

jessie

10-16

91

0

0