Laser cutting processing uses invisible beams to replace traditional mechanical knives. It has the characteristics of high precision, fast cutting, not limited to cutting patterns, automatic typesetting to save materials, smooth incision, low processing cost, etc., and will gradually improve or replace the traditional metal cutting process equipmen...
2022-12-1240500The bottom of the scanned figure is uneven
2022-12-0931510The camera area displays abnormally or does not display
2022-12-0939810The laser light is weak and cannot be controlled
2022-12-09413101、 The intelligent control panel of water-cooled industrial water chiller is equipped with ammeter, control system fuse, compressor key switch, water pump key switch, electronic temperature controller, various safety protection fault indicators, and unit startup and operation indicators. The operation is simple and convenient.2、 The high-qu...
2022-12-10417001、 Fault phenomenon: alarm for ultra-high room temperatureCause of fault: The ambient temperature of the chiller is too highTreatment method: improve ventilation and ensure that the operating environment of the chiller is below 40 ℃2、 Fault phenomenon: serious condensation of condensateFault cause: the water temperature is much lower than t...
2022-12-1042900The operation control system of metal laser cutting machine includes automatic optimization of imported graphics, human intervention, industrial computer command, etc. The automatic optimization part of imported graphics is composed of computer control CPU, CypCut cutting software and centralized operation panel. The control computer and management...
2022-12-1034200When optical fiber laser cutting machine is used to cut sheet metal materials, the products cut are not only of high precision and smooth section without burr, but also can achieve good results whether cutting thick plates or thin plates. However, these effects are related to the focus control of optical fiber laser cutting machine, so how to contr...
2022-12-10289001. Laser power. There is a threshold of laser energy density in laser welding. If it is lower than this value, the penetration is very shallow. Once it reaches or exceeds this value, the penetration will be greatly improved. Only when the laser power density on the workpiece exceeds the threshold value (related to the material), the plasma will be ...
2022-12-1047700Error reporting Communication error
2022-12-0846810What is the possible reason for the skew of graphics and characters when cutting?
2022-12-0843910How to import your company's information into the software.
2022-12-0833610On December 8, Han's Laser and Midea Group signed a strategic cooperation framework agreement with their headquarters in the United States. This signing means that the two sides will carry out comprehensive and in-depth cooperation in industrial automation, manufacturing intelligence, building digitization and other fields, marking a new chapter in...
2022-12-0938200As we all know, metal products will react with oxygen and water in the air after being exposed to the air for a long time and become rusty. Things like iron pans are good, but they can almost return to their original appearance if they are brushed hard with steel balls. However, if the industrial steel materials used to manufacture aircraft and aut...
2022-12-0944000Recently, the Berkeley Laboratory Laser Accelerator (BELLA) Center in California, USA completed an upgrade, which expanded its capabilities to new areas of high-intensity laser science. The upgraded facility will help relevant scientific research teams to further obtain the data of extreme plasma and develop new cancer treatment methods.Aft...
2022-12-0929800
- Geen gegevens
Nederlands
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski