chanelink logo
CHANELINK
한국어

The Role of Active Tunable Laser in GeSn Nanomechanical Oscillator in Nat Nanotechnology

827
2024-05-14 14:31:16
번역 보기

It is reported that researchers from Nanyang Technological University in Singapore, Federal Institute of Technology Lausanne in Switzerland, Physics Laboratory of Higher Normal University in Paris, National Center for Scientific Research in France, Sorbonne University, City University of Paris, University of Leeds in the UK, and Korean Academy of Science and Technology (KAIST) have reported on the active tunable laser effect in GeSn nanomechanical oscillators. The study was published in Nature Nanotechnology under the title "Actively tunable laser action in GeSn nanomechanical catalysts".

The mechanical force caused by high-speed oscillation provides a good method for dynamically changing the basic characteristics of materials such as refractive index, absorption coefficient, and gain dynamics. Although precise control of mechanical oscillations has been well developed in the past few decades, the concept of dynamic mechanical forces has not yet been used to develop tunable lasers. In the article, researchers demonstrated the active tunable mid infrared laser effect of a compact class IV nanomechanical oscillator. The GeSn cantilever nanobeam suspended on a silicon substrate is driven by radio frequency wave resonance. Electrically controlled mechanical oscillation can induce periodic elastic strain in GeSn nanobeams over time, thereby achieving greater than 2 μ Active tunable laser emission with m wavelength. This study proposes a wide range mid infrared tunable laser with ultra-low tuning power consumption by utilizing mechanical resonance in radio frequency as the driving mechanism.

Figure 1: Design of a GeSn nanomechanical oscillator with actively tunable laser action.

Figure 2: Experimental setup.

Figure 3: Mechanical characterization and simulation.

Figure 4: Characterization of GeSn material.

Figure 5: Laser emission characteristics of the driving oscillator.

Figure 6: Production process.

Source: Yangtze River Delta Laser Alliance

관련 추천

  • The Stanford University team has manufactured the first practical chip grade titanium sapphire laser

    According to a report in Nature on June 26th, a team from Stanford University in the United States has developed a titanium sapphire laser on a chip. Whether in terms of scale efficiency or cost, this achievement is a huge progress. Image source: Nature websiteTitanium sapphire lasers are indispensable in many fields such as cutting-edge quantum optics, spectroscopy, and neuroscience, but they ...

    2024-07-01
    번역 보기

  • The carbon dioxide laser market is expected to reach 7.1 billion US dollars by 2033

    The carbon dioxide laser market will show significant elasticity and sustained growth in the next decade, with a compound annual growth rate of 3.6% expected from 2023 to 2033.This impressive prediction indicates the persistent demand and expanding application of carbon dioxide lasers in various industries.By the end of 2033, the market is expected to reach a significant valuation of $7.1 billion,...

    2023-10-27
    번역 보기

  • Excitation of nanostructures with two near-infrared lasers to increase emission intensity

    Recently, researchers from the Ultrafast Phenomena Laboratory at the University of Warsaw in Poland, in collaboration with a team from the Institute of Low Temperature and Structural Studies at the Polish Academy of Sciences, discovered an enhanced effect on upconversion nanoparticle emission. Relevant personnel have demonstrated that simultaneously exciting these nanostructures with two near-infr...

    09-28
    번역 보기

  • The physicist who built the ultrafast "attosecond" laser won the Nobel Prize

    Pierre Agostini, Ferenc Krausz, and Anne L'Huillier won the award for their ultra short optical pulses, which made close research on electrons possible.Ferenc Klaus, Anne Lullier, and Pierre Agostini (from left to right)Image sources: BBVA Foundation, Kenneth Ruona/Lund University, Ohio State UniversityThis year's Nobel Prize in Physics was awarded to three physicists - Pierre Agostini of Ohio St...

    2023-10-09
    번역 보기

  • Lockheed Martin announces expansion of 16000 square feet 3D printing center

    Recently, US military industry giant Lockheed Martin announced that it will significantly increase its additive manufacturing capabilities and expand its factory in Texas. The expansion project includes approximately 16000 square feet of dedicated space for 3D printing technology, and the addition of some of the largest large format multi laser printers in the space (it is worth noting that Lockhe...

    2024-12-02
    번역 보기