한국어

Credo launches the world's first 800G DSP for linear receiving optical devices, targeting ultra large scale and artificial intelligence data centers

487
2023-11-30 14:36:04
번역 보기

Credo Technology Group Holding Ltd announced today the launch of the industry's first Dove 800 850G digital signal processor IC, which has been optimized for linear receiving optical devices and is also known as semi retiming linear optical devices in the industry. In LRO transceivers or active optical cables, only the transmission path from the electrical input to the output of the optical path includes DSP for signal timing and equalization. Dove 850 is a unidirectional 8 x 112 Gb/s DSP designed specifically for this LRO architecture.

With the rapid growth of artificial intelligence deployment in large-scale data centers, high-speed optical transceivers and AOCs are crucial for connecting thousands of GPUs. Given the enormous volume of these optical components, improving energy efficiency is crucial. Dove 850 meets this requirement while achieving powerful system performance and additional benefits of cost reduction.

Chris Collins, Vice President of Sales and Optical Product Marketing at Credo, said, "Dove 850 can reduce DSP power consumption by up to 50%, optimize costs, and provide customers with easy-to-use, powerful, and interoperable solutions." Our chief transceiver and ultra large scale customers recognize the value of this solution, and we have delivered Dove 850 samples and evaluation boards to meet market demand. "

Transceiver suppliers can further optimize the module cost of Dove 850 by using various optical devices, including VCSEL, silicon photonics, EML, or thin film lithium niobate, depending on application requirements.

The Dove 850 based optical transceiver aims to alleviate the deployment burden on system operators by promoting IEEE compliant optical transmission signaling and eliminating manual, per port tuning, thereby addressing the inherent weaknesses of linear pluggable optical implementation. The result is a decrease in error rate, an increase in sensitivity, a reduction in performance changes, and an improvement in recovery ability for different switch ASICs, PCB wiring, optical components, and environmental conditions.

"Over the past year, LPO has been a hot topic as the industry is seeking ways to reduce data center power consumption. However, due to technological limitations such as interoperability, link accountability, and troubleshooting capabilities, customer enthusiasm has been suppressed, resulting in our prediction of LPO being less than 10% of the 800GbE market," said Scott Wilkinson, Chief Analyst for Optics at Cignal AI. Credo's Dove 850 is a semi retiming solution that addresses these limitations, consumes less power than traditional optical devices, and provides a clear path to 224G for 1.6Tb/s operation. This solution will greatly expand the market for low-power 800GbE solutions, far exceeding LPO.

Each channel of Dove 850 has an independent PLL to support branching applications, host interfaces that comply with OIF CEI-112G-MR standards, and numerous integrated diagnostic functions, which can accelerate product launch time and assist in system debugging.

Source: Laser Net

관련 추천
  • The Influence of Laser Beam Intensity Distribution on Lock Hole Geometry and Process Stability under Green Laser Radiation

    Researchers from the University of Aveiro in Portugal and the School of Engineering at Porto Institute of Technology (ISEP) in Portugal reported a study on the influence of laser beam intensity distribution on the geometric shape and process stability of lock holes under green laser radiation. The relevant paper titled "Influence of Laser Beam Intensity Distribution on Keyhole Geometry and Process...

    03-26
    번역 보기
  • China has successfully developed the world's first 193 nanometer compact solid-state laser

    The Chinese Academy of Sciences reduced the volume of the deep ultraviolet laser by 90% and achieved 193 nm vortex beam output for the first time. Professor Xuan Hongwen described "loading truck equipment into the car trunk". This technology enables a 30% reduction in the size of lithography features, breaking through the bottleneck of the 2-nanometer process. In the next three years, laser power ...

    03-24
    번역 보기
  • The Science Island team has made breakthroughs in high pulse energy mid infrared fiber transmission

    Recently, the Jiang Haihe Research Group of the Health Institute of the Chinese Academy of Sciences Hefei Institute of Materia Medica made important progress in the research of the high-energy pulsed laser transmission system in the mid infrared band, and designed a 78 μ The 6-hole microstructure anti resonant hollow core fiber (AR-HCF) with a larger core diameter achieved efficient transmissio...

    2024-03-23
    번역 보기
  • TRUMPF high-power laser dynamic beam shaping technology creates opportunities for the electric vehicle industry

    It is reported that researchers from TRUMPF in Germany reported research on using dynamic beam shaping of high-power lasers to improve the productivity of hairpin stators, creating opportunities for the electric vehicle industry. Relevant research was published in "PhotonicsViews" under the title "Unlocking opportunities for the EV industry with beam shaping of high-power lasers".The electric vehi...

    2024-07-01
    번역 보기
  • The Application of Femtosecond Laser in Precision Photonics Manufacturing

    Femtosecond laser emits ultra short light pulses with a duration of less than 1 picosecond, reaching the femtosecond domain. The characteristics of femtosecond lasers are extremely short pulse width and high peak intensity.Ultra short blasting can minimize waste heat, ensure precise material processing, and minimize incidental damage. Their peak intensities can cause nonlinear optical interactions...

    2024-02-28
    번역 보기