In general mechanical transmission, the most widely used belt transmission is the ordinary V-belt transmission.Mechanical transmission is widely used in mechanical engineering, mainly refers to the transmission of power and motion through mechanical means. There are two types of friction drives: friction drives that transmit power through friction...

Payson

2023-03-17

902

0

0

High precision ball screw is an important component in the field of mechanical transmission. It is not only widely used in the industrial field, but also in some consumer goods fields. High precision ball screw is a mechanical transmission device that can convert rotary motion into linear motion. Its advantages lie in high conversion efficiency, hi...

Terrelle

2023-03-17

1.2K

0

0

Anyone from ruida? We'redebatingwhether6445g or 6442g suit for our machine??

wizardEK

2022-11-12

1.3K

2

1

hello friends i am making my own galvo laser marking machine but i am confused about the laser beam expander i want to used galvo head 20mm spot with 300*300 working lens so which one beam expender i used for it if some know about it please help me my wechat ID is aqua4108363

AQUA

2023-03-16

886

1

0

My preview screen went from a white background with black lines to a black background with white lines. Not sure if this is a new update or if I push the button to change it somehow has anyone seen anything like this? If so, is it normal or how do I change it back?

Henry

2023-03-16

959

1

0

ver1.3.01 I cant drag and drop svg’s from explorer, can someone suggest a fix? it worked prior to update

Jen

2023-03-16

1K

1

0

I couldn’t get lightburn to recognize my cutter. I have a Makeblock rotary. Any suggestions?

Simon

2023-03-16

1K

1

0

I started getting the “hard limit triggered. machine position is likely lost due to sudden and immediate halt” error today. I had a long cut going, approximately 4 hours, and it stopped about a third of the way with the error. Since then, I’ve received the error a few times when framing. It always stops when traversing from left t...

Williams

2023-03-15

993

1

0

I’m importing vectors that are solid filled shapes, yet when I bring them into Lightburn, they are automatically turned into outlined shapes and so when I preview, it’s treating portions of my design as simply lined etches instead of the filled? is there something that may be turned on in Lightburn that makes it do that or does it just ...

Smith

2023-03-15

1.1K

1

0

Can I restart a project half way through the job, when it has been turned off for the night?I have a long project and I cant watch it over night, and don’t want to leave the laser on over night. But i also don’t want to have to start again.Thank

Miller

2023-03-15

1K

1

0

Dear gods, what communication will you make with mechanical engineers when selecting servo motors? What data do you need to know from the mechanical engineer? Thank you!

Terrelle

2023-03-15

983

1

0

I have seen a device that controls the servo directly through the screen. It should be a special address register for communication. But I want to know how to do it, including parameter setting.

Payson

2023-03-15

938

1

0

Hey there! I bought an FTG rotary, and hooked up to the Y axis on the Lightburn compatible board that came installed in my Monport Blue K40. The machine is working with standard flat burning, so supposedly everything is fine until I swap to the rotary. When I power up, the machine does its Double Homing Routine (once quick, backs off and then does ...

Liam

2023-03-14

1.1K

1

0

Hi guys, I have a Gweike Cloud RF and have had to set my scan off-set in lightburn for 300mm/s at 1.49 mm to remain inside the object I am engraving. This sounds quite a large scan off-set. Can anyone share what off-sets they are using at different speeds. Gweike online help was pretty vague to say the least.

Simon

2023-03-14

1.2K

2

0

Mitsubishi JE servo pulse control. The program logic has been verified to be correct. Now the position of the equipment is not allowed to exceed the range after about ten minutes of operation. The monitoring Mitsubishi motor command pulse accumulation has drifted up. Later, the filter has been added to improve it. After grounding 0V, the single ser...

Payson

2023-03-13

970

1

0