chanelink logo
CHANELINK
日本語

Professor Wu Dong's team at the University of Science and Technology of China created a "dancing microrobot" using femtosecond laser composite materials.

240
2023-08-11 14:28:54
翻訳を見る
It was learned from the University of Science and Technology of China that the team of Professor Wu Dong of the Micro and Nano Engineering Laboratory of the school proposed a femtosecond laser two-in-one multi-material processing strategy, manufactured a micromechanical joint composed of temperature-sensitive hydrogel and metal nanoparticles, and then developed a multi-joint humanoid micromachine with a variety of deformation modes. The results were published in Nature Communications.
 
In recent years, femtosecond laser two-photon polymerization, as a true 3D processing method with nanometer precision, has been widely used to fabricate various functional microstructures. These microstructures show broad application prospects in the fields of micro-nano optics, microsensors and micromachine systems. However, how to use femtosecond laser to realize composite multi-material processing and further build micro-nano machinery with multi-mode is still a great challenge.
 
According to the researchers, the femtosecond laser two-in-one processing strategy includes the construction of hydrogel joints using asymmetric two-photon polymerization and the deposition of silver nanoparticles by laser reduction in local areas of joints. Among them, asymmetric photopolymerization technology can produce anisotropy in the cross-linking density of the local region of the hydrogel micro-joint, and finally make the bending deformation controllable in direction and Angle. In situ laser reduction deposition can accurately process silver nanoparticles on hydrogel joints. These silver nanoparticles have a strong photothermal conversion effect, which makes the mode switching of multi-joint micromachines exhibit excellent characteristics of ultra-short response time and ultra-low drive power. 
 
As a typical example, eight micro-joints are integrated into a humanoid micromachine. Spatial light modulation technology is then used to achieve a multi-focus beam in 3D space, which in turn precisely stimulates each micro-joint. The cooperative deformation between multiple joints enables the humanoid micromanipulator to complete multiple reconfigurable deformation modes. Finally, the "dancing microrobot" was realized at the micron scale. As a proof of concept, by designing the distribution and deformation direction of the micro-joints, the double-jointed micro-robotic arm can collect multiple micro-particles in the same and different directions.
 
According to the researchers, the femtosecond laser two-in-one machining strategy can construct deformable micro-joints in various local areas of three-dimensional microstructures, and achieve a variety of reconfigurable deformation modes. In the future, micromanipulators with multiple deformation modes will show broad application prospects in micro-cargo collection, microfluidic manipulation and cell manipulation.
 
Source: Science and Technology Daily
関連のおすすめ

  • First time! Significant progress has been made in low repetition rate fully polarization maintaining nine cavity fiber lasers

    Recently, the research team of the Aerospace Laser Technology and System Department of the Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, reported for the first time a low repetition frequency full polarization maintaining 9-shaped cavity fiber laser at 915 nm. The relevant research results were published in Optics Express under the title "Low repetition rate 915 nm ...

    2024-05-07
    翻訳を見る

  • Using Topological Photon Chips to Uncover the Secrets of Open Systems

    Conservation of energy is a fundamental concept in physics that can be used to explain anything from planetary orbits to the internal workings of individual atoms.Energy can be converted into other forms, but the overall energy level is usually considered to vary over time. Therefore, when attempting to describe a system, physicists usually pay attention to ensuring that it is isolated from the su...

    2024-02-02
    翻訳を見る

  • Ecken develops a new type of iron silicon powder for 3D printing of motors

    Through the SOMA project funded by the European Union, organic silicon material expert Aiken has collaborated with research partners and clients to develop a new specialized iron silicon powder that can more efficiently 3D print motor components.Yesterday's electric motor was usually made by cutting and shaping parts from a metal plate. 3D printing can fundamentally improve efficiency and...

    2024-01-20
    翻訳を見る

  • Scientists at Peking University invent ultra-thin optical crystals for next-generation laser technology

    BEIJING, Dec. 19 (Xinhua) -- A team of Chinese researchers used a novel theory to invent a new type of ultrathin optical crystal with high energy efficiency, laying the foundation for next-generation laser technology.This photo taken on Dec. 15, 2023 shows a Twist Boron Nitride (TBN) crystal placed on a piece of fused silica in Peking University, Beijing, capital of China. A team of Chinese rese...

    2023-12-20
    翻訳を見る

  • Progress makes laser based imaging simpler and more three-dimensional

    a. b. Schematic diagram of PACTER system calibration and imaging program. BT, beam trap; DAQ, data acquisition unit; HWP, half wave plate; PBS, polarization beam splitter; ER, traverse the relay. The difference between the two modes is highlighted by a black dashed box. c. Schematic diagram of a single component ultrasonic transducer manufactured on ER. d. The ultrasound transducer detected 1D P...

    2023-12-05
    翻訳を見る