日本語

Nature Photonics reports a new type of nonlinear optical crystal - all band phase matched crystal

426
2023-10-07 16:31:49
翻訳を見る

Short wave ultraviolet all solid-state coherent light sources have the characteristics of strong photon energy, practicality and precision, and high spectral resolution. They have significant application value in laser precision processing, information communication, cutting-edge science, and aerospace fields.

The core component of obtaining all solid-state shortwave ultraviolet lasers is nonlinear optical crystals. In the process of nonlinear optics, if the energy of the fundamental frequency light is continuously converted to the doubling frequency light, it is necessary to maintain the second polarization harmonic excited by the fundamental frequency light and the doubling frequency light at the same position and time in the crystal. However, due to the intrinsic dispersion of the crystal, the refractive indices of the fundamental frequency light and the doubling frequency light are different, resulting in different group velocities of the two beams in the crystal, Unable to achieve sustained growth of frequency doubling light, this is a phase mismatch.

Therefore, achieving the application of band phase matching in crystals is generally considered the most difficult technical challenge, determining the final laser output power and efficiency. At present, there are various technical solutions to choose from, such as birefringence phase matching technology for crystal anisotropy, random quasi phase matching technology for spontaneous domain structures within crystals, and artificial microstructure quasi phase matching technology. Among them, the birefringence phase matching technology using crystal anisotropy is the most widely used and effective way to compensate for phase mismatch. This technology utilizes the birefringence characteristics of anisotropic crystals to make a certain polarization of fundamental frequency light incident in a specific direction of the crystal, or change the temperature of the crystal to achieve angle or temperature phase matching, even if the refractive index of fundamental frequency light and doubling frequency light propagating in a specific direction of the crystal is the same, This scheme has high conversion efficiency, but existing crystals all have phase matching wavelength loss, which can be characterized by the difference between the UV cutoff edge of the crystal and the shortest photo matching wavelength( λ Cutoff - λ PM).

Pan Shilie's research team from the Xinjiang Institute of Physical and Chemical Technology, Chinese Academy of Sciences, based on the previous research of cutting-edge progress in the field and the analysis of the current situation of birefringence phase matching of nonlinear optical crystals, put forward the assumption of an ideal state of nonlinear optical crystals in the invited review (Angel.Chem.Int.Ed.2020, 5920302-20317), that is, in nonlinear optical crystals based on birefringence phase matching, Can the ideal state of 'UV cut-off edge equal to the shortest matching wavelength' be achieved? If this assumption can be realized in the crystal, it will provide a new way and idea for the crystal to achieve birefringence phase matching throughout the entire transmission range.

Recently, the team has created a new type of nonlinear optical crystal, namely full band phase matching crystal. This type of crystal is based on the most widely used birefringence phase matching technology and can achieve phase matching for any wavelength within the transmission range of the crystal material. The physical mechanism of full band phase matched crystals was revealed. Starting from the microscopic expression of refractive index and optical conditions such as birefringence dispersion curve, refractive index dispersion curve, and phase matching, two independent evaluation parameters of full band phase matched crystals were given. This evaluation parameter was applied to some classic nonlinear optical crystal materials, and the feasibility and universality of using this parameter to evaluate the wavelength loss of crystal phase matching were discussed. Based on this, an example of nonlinear optical crystal (GFB) is obtained.

The author stated that the experiment investigated the direct frequency doubling output ability of crystals throughout the entire transmission range through multi-level frequency conversion schemes or optical parameter technology schemes. Based on phase matching devices, 193.2-266 nm UV/deep UV tunable laser output has been achieved, verifying the full band phase matching ability of the crystal, making it the first UV/deep UV frequency doubling crystal material to achieve full band birefringence phase matching, The crystal transmittance of this material at 193.2 nm is less than 0.02%, and it can still achieve frequency doubling laser output, verifying its full band phase matching characteristics. More importantly, the crystal has excellent linear and nonlinear optical properties, such as short ultraviolet cutoff edge (~193 nm), large effective frequency doubling coefficient (deff=1.42 pm/V), short phase matching wavelength (~194 nm), and high laser damage resistance threshold (>BBO @ 266/532 nm, 8 ns, 10 Hz), making it a promising nonlinear optical crystal material for 266 nm lasers.

The related research achievement "Achieving the full wavelength phase matching for effective nonlinear optical frequency conversion in C (NH2) 3BF4" was recently published in the journal Nature Photonics (2023, DOI: 10.1038/s41566-023-01228-7).

Figure: GFB crystal structure, microscopic performance analysis, and crystal photos

Source: Xinjiang Institute of Physical and Chemical Technology, Chinese Academy of Sciences

関連のおすすめ
  • BMW uses WAAM 3D printing to optimize derivative designs

    BMW explained how to use WAAM (Arc Additive Manufacturing) starting from 2025 to manufacture lighter and stronger automotive components and reduce waste generation, in order to optimize the use of generative design tools.The demonstrated WAAM process uses aluminum wire raw materials directly deposited through laser welding heads, enabling automotive companies to manufacture lighter and more robust...

    2024-04-13
    翻訳を見る
  • Researchers use machine learning to optimize high-power laser experiments

    High intensity and high repetition lasers rapidly and continuously emit powerful bursts of light, capable of emitting multiple times per second. Commercial fusion energy factories and advanced compact radiation sources are common examples of systems that rely on such laser systems. However, humans are a major limiting factor as their response time is insufficient to manage such rapid shooting syst...

    2024-05-24
    翻訳を見る
  • New machine learning algorithm accurately decodes molecular optical 'fingerprints'

    Recently, a research team from Rice University in the United States developed a new machine learning algorithm - Peak Sensitive Elastic Network Logistic Regression (PSE-LR). This algorithm is adept at interpreting the unique optical characteristics of molecules, materials, and disease biomarkers, which can help achieve faster and more accurate medical diagnosis and sample analysis. The relevant pa...

    05-09
    翻訳を見る
  • GeoCue introduces three new TrueView 3D imaging systems

    Earlier this month, GeoCue, a liDAR mapping hardware and software provider, announced the launch of three new products for its TrueView 3D imaging system. These new systems combine laser scanning and high-resolution imaging, including the TV625, TV680 and TV680LR. All three systems are NDAA-compliant.All three systems are designed to be used in conjunction with drones, and the company note...

    2023-08-04
    翻訳を見る
  • The carbon dioxide laser market is expected to reach 7.1 billion US dollars by 2033

    The carbon dioxide laser market will show significant elasticity and sustained growth in the next decade, with a compound annual growth rate of 3.6% expected from 2023 to 2033.This impressive prediction indicates the persistent demand and expanding application of carbon dioxide lasers in various industries.By the end of 2033, the market is expected to reach a significant valuation of $7.1 billion,...

    2023-10-27
    翻訳を見る