Can Lasergrbl be used for carving and cutting in the same project?My machine is a 10W laser

Christian

2日前

54

1

0

1. Can diode laser cutting cut transparent acrylic?After fine adjustment of relevant parameters, the diode laser (≥ 30 W) can cut transparent acrylic with a thickness of about 6 millimeters.Laser PowerUse 65–70 % of the diode’s peak output to balance cut quality and speed.Cutting SpeedAim for 5–8 mm/s: slower speeds risk excessive melting; faster...

Payson

15時間前

6

0

0

The weather is getting colder day by day, and machines and equipment, like humans, need to be kept warm. The following article introduces the key points related to antifreeze for laser cutting machines.1.Do not turn off the chillerAfter the laser cutting machine is not working, do not turn off the water cooler when ensuring that the power supply w...

Darren

2日前

63

0

0

Laser cutting of thick steel plates has become a part of daily manufacturing, but laser cutting of thick plates still faces some challenges: energy must penetrate deeply, molten material must be cleanly discharged, and the cutting edge must remain stable over long distances. The following are the main challenges faced by the workshop and mature sol...

Miller

10-22

114

2

1

Myth 1: High equipment costsReality: Although the initial investment in a laser tube cutting machine may seem substantial, the long-term operational costs can be competitive compared to other cutting methods. Laser tube cutting machines offer high efficiency, minimal material waste, and reduced setup times, resulting in lower overall production cos...

jessie

3日前

77

0

0

In general, the most direct way to improve processing efficiency is to increase the laser power. When the 60000 watt laser cutting machine was launched, it sparked discussions.Industry experts believe that 60000 watts have the ability to fully replace plasma and flame cutting. Further increasing power does not contribute significantly to cutting e...

Robert Evans

10-25

95

0

0

Fiber lasers have the advantages of high precision, efficiency, and versatility, and are widely used in industries such as manufacturing, construction, and packaging. So, what materials can fiber lasers cut?Metal Materials1.Stainless SteelFiber laser cutting excels in processing stainless steel, achieving remarkable cutting depths of up to 0.75 i...

Williams

10-24

107

0

0

1. Diagonal cutting of metal pipesDiagonal cutting on metal pipes usually refers to oblique cutting at the edge of the pipe, rather than vertical (90 degree) cutting. Diagonal cutting is usually done at a 45 degree angle, but can also be adjusted to other angles depending on the application. This cutting method can achieve precise connections, espe...

Darren

10-23

122

0

0

1. Introduction to the Flying Cutting Function of Laser Cutting MachineWhen laser cutting circular or parts with circular inner holes, the cutting method of moving the laser head from one part to another without lifting the head is called flight cutting, which can significantly improve cutting efficiency.2. Different Types of Laser Fly Cutting Fun...

Gilbert

10-21

122

0

1

In the metal manufacturing industry, laser cutting has become the default choice. Mastering the process control of laser cutting stainless steel and carbon steel can improve production efficiency and part quality.Choose the right laser family for the jobTwo laser technologies dominate industry use: fiber lasers and CO₂ lasers. For most modern shop...

Jen

10-20

153

0

0

I want to use a metal plate to make a laser bed. What is the size of the hole?

Aaron

10-15

152

2

0

I want to cut 15 mm and 18 mm plywood with my laser. Iv not been able to find the right speed and power to cut thru 15 mm and 18 mm plywoods.please help and tell what power and speed should I set to trhu these thicknesses without harming my laser.

Terrelle

10-11

257

3

0

Color filling laser cutting technology can present beautiful color visual effects in your works. The following details each step, allowing you to create stunning colorful works.Step-by-Step Guide to the Color Fill Laser Cut ProcessStep 1: Create Vector FilesThe foundation of any laser cut project is a well-designed vector file. For this guide, we'...

Nugent

10-10

320

2

3

Is it best to use Z offset when cutting material?For example,Focus is 5mm from Tip of laserWood Material is 3mm thickShould i use an offset of 1.5mm?What about for 6mm material? 3mm Offset?What is best practice?

Christian

10-10

229

1

0

I have a 50W CO2 laser cutting and engraving machine, and recently I purchased a laser power meter. I need to develop a measurement program on how to use the laser power meter. Here is my plan.•Ensure you have the correct laser power meter for your laser source and and position the sensor so that it intercepts the path of the defocussed beam.•Fire...

Abel

09-30

298

3

0