I have a D1 Pro 20w and using LightBurn. When I do my burns the laser moves up and down instead of side to side. Is that how it’s supposed to burn? If not…what’s the deal?!(See how the burn marks are vertical instead of horizontal)

Jen

2023-09-05

463

1

0

Im downloading ai/vector/svg files from adobestock. Saves as ai file, when i try to open in lightburn i get pop up “this file is an embedded postscript file, and is not supported by LightBurn”. Didnt have this problem before so wondering how to fix. Thanks!

John Trant

2023-09-05

280

1

1

Kollmorgen’s new AKD2G 24A drive is designed for applications in precision multi-axis servo systems. The new single-cable optimized drive builds upon the strengths of the AKD2G portfolio including upgraded safety features, SD card backup and a graphical display with higher amperage to support more applications with higher power requirements s...

Robert Evans

2023-09-05

266

1

0

In the modern machinery manufacturing industry, precision spur gears are widely used in various high-efficiency transmission systems. As a key mechanical transmission component, it not only has high precision and high reliability, but also can achieve smooth transmission power output. This article will introduce you to the relevant knowledge and ap...

Henry

2023-09-05

355

1

0

In a wide range of mechanical fields, metal gears have always been one of the most common and reliable components in transmission systems. As a key component of efficient transmission, metal gears have won the favor of engineers and manufacturers for their excellent performance and reliability. This paper will introduce the advantages and applicati...

Jamie

2023-09-05

311

1

1

im engraving on a large tumbler with a rotary with the comgrow z1 10w diode. the rotary replaces my Y axis on the z1Y axis looks fine, so this new rotary should be fine, right? however, X-axis seems to be skipping? not sure what the term is…im using Offset Fill instead of Fill to save time:this is what it is supposed to look like.any h...

Vasili

2023-09-04

384

1

0

I’m hoping to create a raised letting ink stamp.Can someone tell me the best way to create a rectangle around these letters, then tell Lightburn to cut around the letters to until it reaches the rectangle?

Nugent

2023-09-04

308

1

0

I’ve download a few patterns from La Hobby Guy. Some of the files are DXF and they don’t appear in the window that shows files available to load in the art library. Only lbart.However if I go the file, open in Lightburn, I can open fine. Can DXF files be loaded in the art library?Thanks!

Christian

2023-09-04

267

1

0

Laser chillers are often used to cool ultraviolet lasers of cutting machines, marking machines, engraving machines and other equipment.In the installation and use of laser chiller, the connection of the safety line is very important. If the wiring is not correct, it may lead to electric shock and other safety accidents. Therefore, we need to under...

Patrick

2023-09-04

437

1

0

On August 29, Huawei threw a bombshell - Huawei MATE 60 pro, which was sold out in less than an hour. The reason why the opening of the new model set off waves in the industry, mainly because at the beginning, China's high process chip was blocked by Western countries, directly let Huawei's performance "shock", and this action may mean that Huawei ...

jessie

2023-09-04

366

1

0

Is there a way to print or otherwise display material library data?I have two similar (extensive) libraries and it’s pretty cumbersome to load one, expand the parents, dig out the settings, write them down, open another library, etc, etc.

Cyril

2023-09-02

461

1

0

I want to engrave into powder coated steel through masking tape so that I can leave the masking tape in place and paint the engraved areas. Anyone have any settings that work for this process using a Galvo laser. Any help would be appreciated.

Gilbert

2023-09-02

367

2

0

I have my laser mounted secure, my camera is mounted secure, I run the calibration and the alignment, and everything is good for a while, then its out of align, I have to re calibrate it for it to work, every time.

Clarence

2023-09-02

289

1

0

3d engraving when you have say a square image and you want to make it round, i know how to use the mask i do that but the sides and top and bottom are white and dont engrave is there a way to add the black to engrave those areas ? if this makes sence ?here is a picture you see the circle and it has white i want to make that part so that it engrav...

Keegan

2023-09-01

353

1

0

I’m engraving some Golf Tees. 10 at once. Positions are set. I pasted 10 small .jpg images of my lettering into the very tight tolerances of the thin tees. All set. Then when the burn started, the laser went way out of the printing zone, with long filled traversal areas on both sides of the lettering. See picture attached. what do I need to d...

Marshall

2023-09-01

379

1

0