We have a laser that serval people can access and we are running into the issue that they are accidently changing the material library when they are trying to change the layer settings. Is there a way to lock the Library so no one change change it? Maybe lock it with a PIN?

Terrelle

2023-03-31

944

1

0

I am engraving many unique files onto tags with a galvo. Is there anyway to force the file to a specific X and Y coordinate on import so that I don’t have to do this manually for every one? Running hundreds of these…

Jen

2023-03-30

986

1

0

Hello! I have modified a lightburn file and then I pressed save. Is there anyway to restore the file to the previous version? Before saving

John Trant

2023-03-30

1K

1

0

Hey folks, brand new user here (only installed yesterday) I’ve watched a few youtube videos and had a fair few successful cuts however I’m a bit stumped by this one.I’ve taken my company mascot which is a PNG, traced the image, then I’ve copied it, removed all but the outer line and given that a different colour with differ...

Robert Evans

2023-03-30

853

1

0

I am new to cutting/engraving and have been making some material test cards to get a feel for the results based on speed and power…And I have a question… In my outline test, lets say I look at 1500mm/m @ 30%, its pretty much exactly the same as 5000mm/m @ 100%…Is there any reason for going slower and at lower power which will j...

Henry

2023-03-30

1.1K

1

0

HiIs there a possibility to import gcode into Galvo Files?I would like to use a different slizer for deep laser engravingTHanks for the feedback

Jamie

2023-03-30

1K

1

0

So I’m using lightburn and trying to fine the best way to remove the back off any mirror so, after testing I find that when I use Bi-directional mode the image looks worst to me, I’ve seen post that use Bi-directional and appears to look better then what I can produce. How do I use that function and get good results? Thanks for your tim...

David

2023-03-30

863

1

0

High precision motion control, that is, to produce the fastest and smoothest time trajectory as far as the mechanical structure allows.How do you do that?Determine the algorithm under system constraintsMeanwhile, the complexity of the algorithm is also restricted by the real-time performance of the system and the speed of the computerUsual...

Kevin

2023-03-30

910

0

0

Cooling capacity refers to the cooling capacity generated by the normal chiller. It is generally expressed in KW and also used as CAL.Refrigerant is the fluid in the refrigerant circulation of water chiller, R22, R404 and so on. Power consumption and power supply are indicated on the nameplate.Water cooled chiller is the use of water cooli...

Marshall

2023-03-30

954

0

0

My Lightburn does not remember my computer. I just bought a new computer and set it up as usual and used it every time I close the program and reopen, I have to set it up again. I followed instructions and imported set info as instructed but it doesn’t keep the set up. My older computer had no problems. I even uninstalled and reinstalled and ...

Darren

2023-03-29

877

1

0

I am new at laser engraving and I’ve been doing some test engraving with text. No matter what size I make the text, the line thickness is the same. Is there a way to adjust this in Lightburn?

Cyril

2023-03-29

816

1

0

Is there any way that we can specify that one of the layers (in my case it is the Red 02 - Boundary Cut layer) always be last in the cut order, regardless of how the ordering is set on import, last used settings etc?I’ve been bitten a few times where I hadn’t noticed another layer is below this, and ended up with inner cuts or engraves...

Gilbert

2023-03-29

984

1

0

Two cylinders hold up one frame on each side. If one of the cylinders is slow the shelf will be forced on one side. I've been thinking about it for a long time and it seems like it's impossible to synchronize the two cylinders, even if the pressure is the same, the piston will not be as tight as it should be over a long period of time, causing it t...

Patrick

2023-03-29

988

1

0

Introduction: There are many kinds of transmission modes, and there are more widely used transmission modes such as mechanical transmission, electrical transmission, hydraulic transmission and pneumatic transmission, but these transmission modes are not perfect. In this paper, the advantages and disadvantages of hydraulic transmission will be intro...

Christian

2023-03-29

937

0

0

I replaced my computer today, windows 10 to windows 11, I installed the newest Lightburn software. connected to my controller no problems.time to calibrate the camera.When I click on lens calibration wizard, the camera view is blank.I have 2 cameras it happens with both cameras.I have tried a ton of things.1. reboot camera/ reinstall windows dri...

Jen

2023-03-28

1.1K

1

0