So I have a Creality Ender 3 S1 Plus with 5W laser module set up. It has not been cutting at its full power, because it cut the same material at the same speeds in Creality Print. So I found out that the S-Value Max setting needs to be set to your machine. My problem is I don’t know what setting to set it to. I’m including a picture of my machine s...

James

2024-11-12

925

1

0

Good morningi have a co2 laser with 6445g controlleri am engraving on granite. i have a problem with horizontally banded lines on engravingis there an upgrade of 6445g. if ibuy new like 6445gt will it be solved the problem?had anyone the same problem? please help!

029EE9D7

2024-11-11

917

1

1

Last night i was running my CO2 laser engraver and everything was running fine. Came out this morning powered on the engraver and the intial start up the head move just fine. Tried to relocate the head of the laser on the ruida controller and nothing moves.  I can't get the head to to move in either direction and the bed will not move. Light 14 is ...

36FC0F44

2024-11-11

857

3

0

I purchased a new laser and computer and downloaded light burn onto the new computer…which is an updated version compared to what I have been using. I check all my settings to make sure they match my other computers/lasers as the new laser is the same as another one I use. When I go to use it, it frames fine but when I try to engrave the laser head...

Roderick

2024-11-11

1.1K

1

0

Dear technical departmentI recently purchased 2 units of the RDC6445S controller to install on two laser cutting machinesand I have some questions to ask.1 - What is the function of the IN1 input of the CN2 connector?2 - Where can I find updated firmware for my controller?3 - The RTlink port is a standard RS232 (+12v/-12V) or TTL port?4 - I...

Ferreira 64

2024-11-11

894

2

0

Hi. I am attempting to use a workflow that generates the following svg i need to import into lightburn. When I import it, the font reverts to Ariel. If I ungroup everything, I can change the font but that is a big time waste. I could also export as paths, but I would prefer to maintain the ability to edit the text. Is there a way to address this? T...

Jack Wilborn

2024-11-07

1K

2

0

Hi, can you please advise. Is there any way to ensure that the beginning (3-5 mm) is also cut through when cutting the poplar plywood? I can increase the power or decrease the speed, but then the rest will be pretty burnt. A ramp like a cnc milling machine would be good. Thanks.

Farouk

2024-11-06

962

3

0

To support the original sharing by excellent designers, Chanelink now specifically launch Designer Bonus Plan. Whether you are a professional designer or creation newcomer, you can win cash bonus with few steps. Not only can you earn bonuses, but also develop your revenue channel. Join Chanelink now, and turn your inspiration into income!Activity ...

CL001

2024-11-08

1K

3

4

On white bath panel mdf but as image this time.sculpfun s9 2000 mm at 75% using jarvis setting and air assist with good ventilation.Edited in gimp and inkscape to remove speckle and firm up lines.

Ethan

2024-11-05

1.1K

2

0

Hi everyone - I’m a newbie to the engraving world and got everything up & running with my Creality Falcon 22W laser + Rotary Pro. I’ve watched all the YouTube videos for full wrap tumblers, messed with all the settings and after trying different things for hours and scouring the internet for my specific issue… I’m still at a loss.The laser is ...

berainlb

2024-11-04

1K

3

0

So I just replaced the tube in my machine and got a wattage tester to confirm its output. After a lot of careful testing, I’m finding that it is maxing out at 110ish watts on a 130 watt tube. Because of this, I’m hoping to find a way to do a system wide power scale so that if for a part I need as much power as I can get, I can put it 100% into the ...

Rajiv001

2024-11-06

866

1

0

What I'm worried about is when I want to carve a circular logo on a water bottle, for example, if the image on Ligtburn is clean but distorted on my water bottleI checked the rotation and support settings, but it had no effectThe rotation setting is good, and the belt is tightened.Carving machine Atzer L2 36WRotaru AtomStack R1 ProPlease help ...

Tim Johnson

2024-11-01

829

2

0

This is a magic of ruida controller

S A Designs

2024-11-02

982

2

2

Hi,Yesterday when i turned on the machine it started flashing red light and continually beeping. I tried restarting but nothing happened. then i moved the head in the middle and it stopped. After that, the laser started to turn of for 2-4 seconds during cutting while the head continued on the cutting path and then turned on again. Also if i run a f...

JOST

2024-10-31

1K

2

0

I am trying to update my camera overlay but it is constantly grayed out. I have tried doing the alignment multiple times but haven’t had any luck

Durell

2024-11-01

1K

1

0