I have Atomstack S10 Pro and when I press the Show laser position button, the laser should light up, is that correct? Before that I enabled from settings “enable laser fire button”. This function does not work for me. Am I doing anything wrong?
2023-04-011K10When I turn on my Atomstack X30 the jog controls in Lightburn do not work, and, when I hit home, it noisily move to the left of the x axis and keeps pounding away on the edge of the y axis without stopping
2023-04-011.2K10Hi all.I am trying to adjust slots/tabs but don’t see an option to adjust the end tabs. See image. Is there a way to do this through slot tab resizer?Thank you
2023-04-011K10Hello guyshow can i swap axis locations in Lightburn?I have an Atomstack S10 Pro + ExtensionMy desktop looks 410x850 I want to see 850x410.This will be much more convenient for me to work with
2023-03-311.1K10Is the “Focus Z” controller-specific funbction?I use at Cohesion3CD controler, and the bottum does not seeam to do anything.Is it beasuse the function is specific to the controller?
2023-03-3198610We have a laser that serval people can access and we are running into the issue that they are accidently changing the material library when they are trying to change the layer settings. Is there a way to lock the Library so no one change change it? Maybe lock it with a PIN?
2023-03-311K10I am engraving many unique files onto tags with a galvo. Is there anyway to force the file to a specific X and Y coordinate on import so that I don’t have to do this manually for every one? Running hundreds of these…
2023-03-301K10Hello! I have modified a lightburn file and then I pressed save. Is there anyway to restore the file to the previous version? Before saving
2023-03-301K10Hey folks, brand new user here (only installed yesterday) I’ve watched a few youtube videos and had a fair few successful cuts however I’m a bit stumped by this one.I’ve taken my company mascot which is a PNG, traced the image, then I’ve copied it, removed all but the outer line and given that a different colour with differ...
2023-03-3090310I am new to cutting/engraving and have been making some material test cards to get a feel for the results based on speed and power…And I have a question… In my outline test, lets say I look at 1500mm/m @ 30%, its pretty much exactly the same as 5000mm/m @ 100%…Is there any reason for going slower and at lower power which will j...
2023-03-301.2K10HiIs there a possibility to import gcode into Galvo Files?I would like to use a different slizer for deep laser engravingTHanks for the feedback
2023-03-301.1K10So I’m using lightburn and trying to fine the best way to remove the back off any mirror so, after testing I find that when I use Bi-directional mode the image looks worst to me, I’ve seen post that use Bi-directional and appears to look better then what I can produce. How do I use that function and get good results? Thanks for your tim...
2023-03-3091110High precision motion control, that is, to produce the fastest and smoothest time trajectory as far as the mechanical structure allows.How do you do that?Determine the algorithm under system constraintsMeanwhile, the complexity of the algorithm is also restricted by the real-time performance of the system and the speed of the computerUsual...
2023-03-3097000My Lightburn does not remember my computer. I just bought a new computer and set it up as usual and used it every time I close the program and reopen, I have to set it up again. I followed instructions and imported set info as instructed but it doesn’t keep the set up. My older computer had no problems. I even uninstalled and reinstalled and ...
2023-03-2995410I am new at laser engraving and I’ve been doing some test engraving with text. No matter what size I make the text, the line thickness is the same. Is there a way to adjust this in Lightburn?
2023-03-2987810
- Nessun Dato
Italiano
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski