I just received lightburn but somehow lost the 2 right boxes the top one is Cuts/layer and under thatis lazer. Does anyone know how to get them back on the screen

Payson

2023-04-06

1K

1

0

Servo electric gripper is a common industrial robot equipment, which has a wide range of applications. In practical applications, precise motion control plays an important role in the performance and efficiency of the gripper. This paper will discuss the motion control of servo electric gripper, including its principle, control method and applicati...

jessie

2023-04-06

1.2K

1

0

Is there a commad to make the laser head return to home after job finish instead of returning to sart position

Jamie

2023-04-04

1.2K

1

0

All of the sudden, all my images appear upside down when I view them in preview mode. If I reset my device setting to the top-left instead of the bottom-left, they simply reverse. Before today, an image looked the same in both the work area and when I previewed it.

David

2023-04-04

876

1

0

A file I uploaded won’t cut or engraving because of “no output layers selected for output” error message. The thing is…in the cuts/layers screen there is not an “output” toggle. Can someone please help me?Thank you

Tory

2023-04-04

982

1

0

We all know the three-ring, in which the current ring is adjusted by the driver itself, we need to do the work is to adjust the outside speed ring and position ring, inside this is the classic PID control,When we carry out positioning control, the speed curve and displacement curve will be planned in advance, and then the PLC is sent to the servo ...

Keegan

2023-04-04

1K

1

0

Gear is one of the commonly used parts in mechanical transmission. It is a device that transmits power and motion through the meshing relationship between the rack and gear. A gear usually consists of a group of meshing gears and shafts. The number and shape of the gear teeth are different, which can achieve different transmission ratios and transm...

Abel

2023-04-04

1K

0

0

Hi there,I wanted to share the gradient charts i’ve created, because i find them extremely useful. They are set to be done on an A4-sized material (297x210mm) but you can of course resize them as you wish.You will find all charts in Lightburn format herebelow.Speed and Power values should be ok with most of the recent machines, like X-tool, ...

Keegan

2023-04-01

931

2

0

Imported an image into LB file many weeks/months ago, how can I find out what the original image was when imported? Want to make some adjustments to img, but can’t find. Possible or not?

Gilbert

2023-04-03

1K

1

0

I have a Creality Falcon, when I use a TF card Frame will show the laser and where it’s going to work, however when I plug it into my computer Lightburn does not show the laser while doing a Frame. I have the laser turned on while framing on and the fire button is also on. Am I missing something?

Terrelle

2023-04-03

1K

1

0

I’ve just installed it, the device is connected as can be seen from the highlighted line in the terminal in the screenshot, but nothing shows up. I’ve added myself to dialout and tty, as per these instructions but it just doesn’t work.What am I missing?

Patrick

2023-04-03

1.1K

1

0

I have seen several posts stating that you can use the number keypad to position the laser. My problem is that my computer is a laptop and doesn’t have a number keypad. Any ideas of a workaround?

Robert Evans

2023-04-01

1K

1

0

I have lost color palate at bottom of page> Blockquote

Henry

2023-04-01

1.2K

1

0

In my design it looks good in the program but preview only shows bottom half of the words?Any idea why?

David

2023-04-01

1.1K

1

0

If I double click the LightBurn icon the software opens in nonfull screen. I need to click the full screen box two more times to have it open full screen . Is this a windows setting or a setting in LightBurn?

Marshall

2023-04-01

1.2K

1

0