Français

Xi'an Institute of Optics and Fine Mechanics has made new progress in the research of intelligent optical microscopy imaging

468
2024-09-09 16:34:45
Voir la traduction

Recently, the State Key Laboratory of Transient Optics and Photonics Technology of Xi'an Institute of Optics and Fine Mechanics has made new progress in the research of intelligent optical microscopic imaging, and the research results were published online in the international high-level academic journal Opto Electronic Advances (IF: 15.3). The first author of the paper is Tian Xuan, a 2024 doctoral candidate of Xi'an Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, and Li Runze, a special research assistant. The corresponding authors are Associate Researcher Bai Chen and Researcher Yao Baoli.

The phase information carried by light waves can reveal the thickness, refractive index, geometric morphology, and other characteristics of matter. As it cannot be directly sensed by optical sensors, interference methods are usually required for detection. Digital in-line holographic microscopy (DIHM) has become a commonly used method for quantitative phase imaging due to its high spatial bandwidth product, label free, non-invasive, and fast imaging speed. However, in practical applications, the interference of twin images during holographic reconstruction and the loss of sub-pixel information caused by the use of large pixel size detectors can hinder high-quality DIHM imaging. Deep learning, with its noise suppression and inverse problem solving capabilities, has become a powerful tool for DIHM imaging and pixel super resolution (PSR). However, most current deep learning based methods rely on supervised learning and training instances to optimize their weights and biases. Collecting a large number of holograms and their corresponding high-resolution raw phase maps is not only time-consuming in experiments, but also very difficult to collect training data. In addition, the trained model has very limited generalization to samples that are different from the training data.

Figure MPPN-PSR phase imaging: (a) Full field pixel super-resolution phase imaging of TOMM20 antibody cells, (b) Comparison of different PSR phase reconstruction methods, and (c) corresponding optical thickness maps.

In response to the above issues, the research team proposed a non trained neural network for DIHM pixel super-resolution phase imaging, namely the Multi Prior Physical Enhancement Neural Network (MPPN-PSR), which can reconstruct phase information of samples from coaxial holograms with high throughput, high accuracy, and high resolution. MPPN-PSR combines neural networks and physical models, encapsulating physical model priors, sparsity priors, and depth image priors in an untrained deep neural network. This avoids the need for a large amount of training data for neural networks and does not require any additional hardware design. It can achieve twin image suppression, pixel super-resolution, and high-throughput phase imaging with only a single hologram. Compared with the phase recovery method without PSR, the MPPN-PSR method increases the pixel resolution of the image by three times. Compared with the classic phase recovery method Twist TV-PSR that combines pixel super-resolution, the optical resolution is increased by about two times. Moreover, due to the use of the inherent large field of view of the low magnification objective lens, MPPN-PSR improves the spatial bandwidth product of the imaging. This research result is expected to provide reference for other digital holographic imaging schemes and be widely applied in the fields of biomedical and industrial measurement.

In recent years, the Yao Baoli team of the State Key Laboratory of Transient Optics and Photonics Technology has conducted in-depth research on intelligent optical microscopic imaging technology, and formed a variety of new optical microscopic imaging technologies, which have achieved significant improvements in imaging functions, information acquisition dimensions, performance indicators, etc., including three-dimensional imaging of full-color wide field micro light slices, fast super resolution three-dimensional imaging of confocal microscopy, fast three-dimensional microscopic imaging of light slices, etc., as well as high-resolution and high signal noise ratio microscopic imaging of light slices, computational imaging through scattering media, etc., which are achieved using compression sensing technology. The relevant research results were published in Photon Journals such as Res, Opt Lett, Opt Express, etc. In addition, the team has conducted long-term theoretical and experimental research on optical microscopy imaging and optical micro manipulation based on light field regulation. They have published more than 300 papers in journals such as PNAS, Nature Com., PRL, Rep. Prog. Phys., Adv. Opt. Photon. They have been granted multiple national invention patents and have won awards and honors such as the first and second prizes of Shaanxi Provincial Science and Technology Innovation Team and Shaanxi Provincial Key Science and Technology Innovation Team.

Source: Opticsky

Recommandations associées
  • Samsung and SK Hynix Explore Laser Debonding Technology

    According to South Korean media etnews, Samsung Electronics and SK Hynix have started the process technology conversion of high bandwidth memory (HBM) wafers, with the introduction of new technologies to prevent wafer warping as the core, which is considered to be aimed at the next generation HBM. It is expected that with the process transformation, the material and equipment supply chain will als...

    2024-07-16
    Voir la traduction
  • The constantly developing world of all-weather laser satellite communication

    Using light beams for communication is not a new idea, even outside of Star Trek, Star Wars, and other similar fantasy stories. Scientist and science fiction writer Arthur Clark predicted that beam communication, at that time modern satellite communication was just a dream.In 1975, the magazine published an article about laser communication or laser communication equipment. The demonstrati...

    2023-12-01
    Voir la traduction
  • Luxiner launches LXR platform to set new standards for industrial laser microfabrication

    Luxiner, a globally renowned laser technology leader, proudly launches its latest innovative product, the groundbreaking LXR ultra short pulse laser platform. This cutting-edge technology represents a significant leap in industrial laser processing, providing unparalleled performance, versatility, and reliability.In today's rapidly changing industrial environment, laser technology plays a crucial ...

    2024-03-25
    Voir la traduction
  • The 3D toy printer is easy to use and safe, perfect for children and adults

    Children (and adults) like to collect toys, but what if they can make them themselves? This is exactly the focus of the Toybox 3D printer luxury bundle. This 3D printer for children's toys incorporates innovative technology into simplified products, making it very suitable for young people. Do you want to have your own? The cost of this 3D toy printer has been reduced to $348.99.Generally speaking...

    2024-06-05
    Voir la traduction
  • Shanghai Optics and Fine Mechanics Institute has made progress in the new holographic imaging technology of frequency domain direct sampling

    Recently, a research team from the Aerospace Laser Technology and Systems Department of the Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, proposed a new holographic imaging technology using frequency domain direct sampling. The relevant results were published in Optics Letters under the title of "Fourier inspired single pixel holography".Digital holography is a tech...

    03-20
    Voir la traduction