Français

Researchers have implemented a creative approach to reduce stray light using spatial locking technology based on periodic shadows

813
2023-10-16 10:40:33
Voir la traduction

Reducing stray light is one of the main challenges in combustion experiments using laser beams (such as Raman spectroscopy) for detection. By using a combination of ultrafast laser pulses and gated ICCD or emICCD cameras, a time filter can be effectively used to remove bright and constant flame backgrounds. When the signal reaches the detector, these cameras can open electronic shutters within the time range of ps to ns. However, stray light from other sources still interferes with available signals, especially for low-frequency measurements.

Researchers around Andreas Ehn at Lund University have implemented a creative method to reduce stray light based on a spatial locking technique called periodic shadows. Although the concept of this measurement technique has been demonstrated before, Lund's researchers described in a recent paper that they "improved its feasibility, strength, and robustness" by implementing this method using fiber optic probes.

The experiment used a bundle of 19 optical fibers, which were arranged in a dense circular pattern on the signal collection side of the fiber, but in a linear pattern on the spectrometer side. Each fiber carrying the signal is followed by a dark fiber to generate appropriate fiber spacing along the entrance slit of the Isoplane SCT 320 spectrograph. The fiber pattern is approximated by a square wave function. At the exit of the spectrograph, use a fast gated PI-MAX4 ICCD camera to collect spectral images. The Isoplane spectrograph is an aberration correction system that can maintain high signal accuracy without distortion even in a large sensor area, which helps to reconstruct signals from collected images. The periodic structure of the analyzed signal is calculated column by column through Fourier transform, multiplication with the reference signal, and bandpass filter, which leads to a reduction in DC like offset like the stray light component on the detector.

The researchers further demonstrated the application of this technology in gas and premixed flame Raman spectroscopy. They not only indicate that the reconstructed signal provides a quantitative and accurate measurement of species mole fraction and temperature in the flame, but also that stray light is suppressed by almost two orders of magnitude (with a factor of 80). Their conclusion is that their concept is very valuable for accurate spectral measurements in experiments with limited optical channels.

Source: Sohu

Recommandations associées
  • Europe builds an independent supply chain for Alexander laser crystals for space missions and atmospheric research

    Recently, companies from Lithuania, Italy, and Germany have reached a new milestone in the European independent space mission - based on the Galactic project, they have developed a supply chain for Alexandrite laser crystals in Europe to study changes in the atmosphere and Earth's surface.The high-power Alexander laser crystals and coatings developed in the GALACTIC project will be used to collect...

    2023-12-22
    Voir la traduction
  • HGTECH Laser's New Product Debuts at the 2025 Munich Shanghai Light Expo

    New Product for Wafer Testing Probe Card Manufacturing Equipment Project This project adopts vision guided laser precision cutting to separate the probe from the crystal disk, and then generate a product mapping image for use in the next process. When picking up the probe, multi-point reference surface fitting technology is used to achieve non-contact probe suction and avoid force deformation. A...

    03-07
    Voir la traduction
  • Alcon acquires ophthalmic laser equipment company for $466 million

    On July 3rd local time, Swiss ophthalmic care giant Alcon announced the acquisition of Israeli medical technology company Belkin Vision and its laser equipment assets for treating glaucoma.The transaction includes a prepayment of $81 million, of which approximately $65 million is in cash. In addition, if Alcon can establish this technology as the preferred first-line treatment option for clinical ...

    2024-07-09
    Voir la traduction
  • Stuttgart University researchers develop a new high-power 3D printed micro optical device for compact lasers

    Researchers from the Fourth Institute of Physics at the University of Stuttgart have demonstrated the feasibility of 3D printed polymer based micro optical devices in harsh laser environments.This study was detailed in the Journal of Optics, outlining the use of 3D printing technology to directly manufacture microscale optical devices on fibers, seamlessly integrating fibers and laser crystals int...

    2024-01-09
    Voir la traduction
  • XLight raises $40 million in financing to develop new EUV light sources

    xLight, a US startup aiming to commercialize particle accelerator driven free electron lasers (FELs) for use in semiconductor production, says it has raised $40 million in a series B round of venture funding.The Palo Alto, California, firm said that the support would enable it to develop a prototype next-generation light source capable of emitting at extreme ultraviolet (EUV) wavelengths that are ...

    07-23
    Voir la traduction