I may have accidentally selected an incorrect setting, but I can not seem to identify where. When I run this file through the simulator, the top color engraves last, whereas it should be engraved firs...

• RDWorksV8
• laser engraving
• RuiDa

As the title says, after installing the RDWorksV8 plugin in CDR, I want to perform both laser engraving and cutting simultaneously. How do I do that?

• RDWorksV8
• laser engraving
• laser cutting
• RuiDa

想问下，对于锤子画，V8软件可以加工吗？我自己设置的位图处理，感觉不是很好好，选择反色雕刻，是只雕刻了图案，但是打点黑色也打，白色也打还很深

• RDWorksV8
• laser engraving
• RuiDa

When I was using LaserGRBL for laser engraving, I found that the direction of the laser head movement was completely uncontrollable. Although clicking on the X-axis to move forward in the software, th...

• coordinate axis
• LaserGRBL
• laser head
• laser engraving

After replacing the laser tube, the power of the RD 644xs engraving machine cannot be adjusted. The speed can be adjusted, but the power cannot be adjusted. What is going on?

• laser engraving
• RuiDa

I'm using an RDC6442S-B(EC) controller, and I've connected my laser to the local network. The network connection itself seems fine, but RDWorks keeps giving me a "communication failed" error. Any idea...

• RDWorksV8
• laser engraving
• control system
• RDC6442S
• RuiDa

M1s controller, the picture is correct. MOPA laser is used to create relief on aluminum material. After trying for a long time, only the surface is affected. How to adjust the parameters?

• laser engraving

I set a power (S-Max) in LaserGRBL, but engraving occurs at lower power. Why is this happening? How should I adjust?

• LaserGRBL
• laser engraving

I initially used LaserGRBL, but I am not familiar with many operations. After opening the software, I searched for the rotation function on the interface, but the operation steps were not very intuiti...

• rotate
• LaserGRBL
• laser engraving

I recently purchased an 80w Laser cutter with the RDV6442s controller. I am using RDworks and when I try to use the scan facility with speeds of more than 150mm/s there is a massive overshoot. I use a...

• laser engraving
• RDC6442S
• laser cutting
• RuiDa