I have a 6442s laser cutter, but I want to install a camera to make precise cuts. Please help with the setup.

9EC1C204

06-25

1.1K

1

0

I have 150W Chinese Laser machine, it is is fitted with Ruida RDC6445S(EC), it is double head laser machine. Head 1 is connected with CN-5 and Head 2 is connected with CN-6.I have issue since I received the machine, Head 1 is firing laser normally, but Head 2 does not fire, I have double checked all the setting in Ruida controller and RDWorks.Whe...

C915A9E2

01-16

1.8K

14

2

Hello, we have a Ruida controller RDC6563FG for fiber laser cutter. Everything now works fine, except I can't change axis working speed parameters. In the service menu I'm trying to change the parameter Max. work speed, I've entered e.g. 2000 mm/s for axis movements speed. In the USER menus the max manual movement 500mm/s. Above these limits I can'...

Elektron

06-19

1.1K

0

0

I want to use my device offline. I bought a samsung 64 Evo Plus sd card for this, but when I insert the card, I get the No Sd Card warning. What would be the reason. Sd card in exfat format.

Christian

2023-05-11

1.3K

2

1

Import file failed, what is the reason?

Tim Johnson

05-20

1.6K

5

0

When using the brush function to rotate the Z-axis instead of the U-axis for machining, there is always a gap reset action，

Ruddy

05-20

1.1K

4

0

I am a novice, I tried to use an engraving machine to carve some patterns, but I found that the engraving machine did not carve in the correct direction of the pattern, but in the wrong direction. How can I change the setting? I use RDWorksV8 software

ElenaXavier

05-27

1.3K

2

0

Buen día me pueden ayudar una máquina láser de 90cm x 60cm me sale en la máquina que el tamaño de trabajo es de 38cm x 30cm como puedo ponerla para 90x60

BFF58ACE

05-26

1.3K

2

0

What version of RDworks is supposed to be used with this. I have v8.01.66 and am unable to connect via static wired ethernet or wifi. I can ping both ip's so I know it's online, just no software control via RDworks or lightburn

Colten

05-17

1.2K

6

0

Handheld laser welding is another new application technology of laser. Its principle is to aim a highly energy dense laser beam at the material, thereby rapidly heating and melting the material locally, forming a welding interface, and ultimately achieving the welding effect. Handheld laser welding equipment mainly includes lasers, welding heads, c...

Jamie

2024-10-22

903

2

0

I use a new Monport 80w camera with RDC6442G.However, I hit autofocus in Lightburn or the Z-axis menu and the camera breaks. (This camera does not have a Z-axis limit switch).Can I disable the autofocus feature in the control panel or machine settings?I looked at the Ruida manual but it didn't help much with this problem.

ElenaXavier

05-15

1.3K

1

1

The servo motor only moves in one direction,How should I handle it?

LWE

05-20

1.4K

1

0

Fault analysis:1. The installation path is not selected correctly2. No VBA plugin downloaded3. The VBA plugin version is incorrect compared to the CAD version Solution:The reinstallation path is correct. After checking, it was found that the CAD version sent was 2023 and the VBA plugin version was 2018, which caused the failure. After re downlo...

Abel

05-19

1K

0

0

Frequency converters are widely used in modern industry, but sometimes there are occasional trips that cause inconvenience to production. Below, we will analyze the common causes of frequency converter tripping and provide corresponding solutions.Overload causes trippingOverload is one of the common causes of frequency converter tripping. When th...

Tory

01-14

1.9K

1

1

Fault analysis:1. No fan enabled2. Relay wiring is incorrect3. Layer setting issue Solution:The layer parameters are set to not blow air

Aaron

05-19

1.2K

0

0