A three-phase asynchronous motor is a type of motor that relies on the simultaneous connection of a 380V three-phase AC power supply. Due to the fact that the rotating magnetic field of the rotor and stator of the three-phase asynchronous motor rotates in the same direction but at different speeds, there is a slip rate, so it is called a three-phas...
2024-04-1692210Which color is the best for laser coding?
2024-04-1690310What is the control technology for the acceleration and deceleration process of stepper motors?
2024-04-151K20Servo motors usually have a braking function, which generally refers to the electromagnetic mechanical holding brake device at the rear end of the servo motor. It is usually installed at the rear end of the motor and brakes the motor and locks the motor spindle through the brake pads acting on the motor spindle during operation.So the brake of th...
2024-04-151K10Servo motor wiring steps and methods:1. To determine the power cord and ground wire, servo motors usually need to receive power supply. Firstly, it is necessary to confirm the power requirements of the servo system and the wiring method of the power cord. Usually there are two power cords, one is the positive (+) and the other is the negative (-)....
2024-04-131K20Why does a stepper motor not require an encoder?
2024-04-1394820Can the gear transmission system eliminate travel errors through rotation?
2024-04-1398510What is the acceleration and deceleration time set in the servo motor? What is its purpose?
2024-04-111.1K20The visual laser control system is a new type of CNC system that combines visual recognition technology and laser control technology. Its principle is to identify the processing object through visual technology, and control the laser control to precisely process the target by positioning the processing object. Compared with ordinary laser control s...
2024-04-1196110What should I do if the stepper motor loses its step?
2024-04-111.1K10A research team from the University of Alto in Finland has explored and implemented a new mechanism for laser operation. Through this mechanism, users can remotely control plasma nanolasers using a magnetic field.Previously, the only way was to "switch" plasma nanolasers through direct operation. However, with the development of topological photo...
2024-04-1098010Hello dear Ruida team,i got the Ruida RDACC Fiber Module V2.0 from you. I activated the calibration menu during the dry running test.Here the voltage was displayed to me and then the module switches after two seconds and then displayed 0 volts. Because i didn't understand it at first, i confirmed the 0 Volt value by pressing Enter. Now the modu...
2023-12-1285240The water-cooled unit has a large volume, relatively high applicable power, and high power consumption during working hours, so it is suitable for working scenarios with continuous working conditions and relatively thick plates. Moreover, it is easy to achieve mechanical arm operation, which means it can operate continuously with high power and int...
2024-04-10970001. Synchronous belt drive has the advantages of belt drive, gear drive, and chain drive.2. The synchronous belt transmits kinetic energy to achieve long-distance center distance transmission, with accurate transmission ratio and no sliding during operation; High transmission efficiency; Smooth transmission, able to absorb vibration, and low...
2024-04-10826001. How to choose a motor?Step angle: Calculate the required step angle, which is the angle at which the motor rotates each time it receives a pulse.Speed range: Determine the ideal speed range, including the minimum and maximum speed requirements.Torque output: Estimate the required torque output to meet the load requirements of the application.Mot...
2024-04-091K10
- Aucune donnée
Français
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski