Español

Progress made by the Precision Measurement Institute in Thorium Ion Trapping Research

740
2024-06-21 14:25:12
Ver traducción

Recently, the Cold Molecular Ion Research Group of the Institute of Precision Measurement has made significant progress in the loading, trapping, and recognition of thorium ions. The related research results have been published as cover and selected articles in the international physics journal Journal of Applied Physics, titled "Loading and identifying variable charged thorium ions in a linear ion trap with a time of flight mass spectrometer".

In recent years, the measurement of the first excited state energy of thorium-229 atomic nuclei has become a frontier and hotspot in precision measurement physics research. The energy of the first excited state of thorium-229 atomic nucleus is only about 8.3 eV higher than that of the ground state, and the corresponding radiation transition line width is about 10-4? Hz。 At present, thorium-229 is the only nuclide confirmed to be capable of using laser to regulate nuclear energy levels and achieve nuclear clocks.

The research team successfully trapped and accumulated thorium ions in an ion trap using a dynamic loading combined with buffer gas collision cooling method [2]. Meanwhile, the self-developed ion trap time-of-flight mass spectrometry combined system was used to analyze the quantity, velocity distribution, and trapping lifetime of thorium ions. The relevant achievements have laid the technical foundation for further exciting thorium-229 nuclear transitions through electron bridge processes [3].

PhD students Li Lin and Li Zi from the Institute of Precision Measurement are the co first authors of this article, Associate Researcher Hua Xia is the co author, and Researcher Tong Xin is the corresponding author.

This work has been supported by the National Natural Science Foundation of China and the National Key Research and Development Program.

[1] Zi Li,Lin Li,Xia Hua,and Xin Tong,Loading and identifying various charged thorium ions in a linear ion trap with a time-of-flight mass spectrometer,J. Appl. Phys. 135,144402 (2024).

[2] Lin Li,Zi Li,Xia Hua,and Xin Tong,Dynamic laser ablation loading of a linear Paul trap,arXiv:2402.17981,J. Phys. D accepted (2024).

[3] Lin Li,Zi Li,Chen Wang,Wen-Ting Gan,Xia Hua,and Xin Tong,Scheme for the excitation of thorium-229 nuclei based on electronic bridge excitation,Nucl. Sci. Tech. 34,24 (2023).

Cover and Selected Articles of the International Journal of Applied Physics

Source: Institute of Precision Measurement Science and Technology Innovation, Chinese Academy of Sciences

Recomendaciones relacionadas
  • BLM Launches Tunable 4kW Five Axis Laser Cutting System

    Recently, the Italian laser pipe processing group BLM Group announced the launch of an LT-Free five axis laser cutting system that can be used for laser cutting and processing of any three-dimensional metal profile, including bending forming, hydraulic forming, extrusion forming, deep drawing forming, flat or stamped forming of pipe fittings or plates.This five axis laser cutting system can provid...

    2023-10-11
    Ver traducción
  • Real time measurement of femtosecond dynamics of relativistic intense laser driven ultra-hot electron beams

    In the interaction between ultra short and ultra strong lasers and matter, short pulse width and high energy electrons are generated, commonly referred to as "hot electrons". The generation and transport of hot electrons is one of the important fundamental issues in high-energy density physics of lasers. Superhot electrons can excite ultrafast electromagnetic radiation in a wide range of wavelengt...

    2024-06-21
    Ver traducción
  • BLM Group launches a new LT12 laser tube cutting system

    Recently, BLM Group in the United States has launched a new LT12 laser tube system, which performs well in cutting light and heavy pipes and profiles, and can handle materials with a diameter of up to 305 millimeters.According to the company, compared to other similar machines, the LT12 laser tube system reduces cutting time by up to 55% when cutting materials with the same maximum diameter, signi...

    2024-04-18
    Ver traducción
  • Jenoptik invests 100 million euros to open new factory

    On May 30th, Jenoptik announced on its official WeChat account that after approximately two and a half years of construction, its new factory in Dresden, Germany, with an investment of nearly 100 million euros, has officially opened. This is the largest single investment project in Jenoptik's recent history.Jenoptik President and CEO Dr. Stefan Traeger stated that this new factory will make Dresde...

    06-05
    Ver traducción
  • Amada launches latest precision laser welding workstation wl-300a

    Recently, Amada weld tech Inc., a Japanese supplier of welding and cutting solutions, grandly launched a new wl-300a precision laser welding workstation, which is equipped with advanced continuous wave (CW) or quasi continuous wave (QCW) fiber lasers. It has a wide range of applications, especially for metal welding and processing of selected plastic materials, especially in the aerospace field.Wl...

    2024-05-31
    Ver traducción