chanelink logo
CHANELINK
Español

Creativity Falcon 2 laser cutting machine will be launched in Germany equipped with a new 60W laser head

206
2024-05-29 14:50:08
Ver traducción

Starting from June 20th, The Creativity Falcon 2 laser cutting machine will also be launched in Germany, equipped with a new 60W laser head. With this ability, fully encapsulated equipment can now also be carved into steel.

 


High power is achieved through twelve 5-watt laser diodes, whose beams are combined with each other. This will make it possible to cut 22mm thick lime wood and 30mm thick organic glass. According to the manufacturer, stainless steel plates can not only be carved but also cut 0.2 millimeters thick. For example, by turning off a single diode (through software), the laser power of sensitive materials can also be reduced. The cutting machine should belong to Laser Class 1.

For thinner materials, it is said that the cutting speed of the new laser head is more than three times faster, for example, the cutting speed of 5mm walnut plywood can reach up to 700 millimeters per second. Due to its high power, the material evaporates faster, resulting in almost no smoke generated at the cutting edges.

The shell comes with a prominent orange transparent cover, providing safety features in case of accidental opening. There is also a drawer at the bottom that can collect cutting waste and is easy to clean. The 1.6W laser head is also equipped with a laser cutting machine, which is said to be more suitable for fine carving.

Falcon2 60W is now available for booking with a discount of over 400 euros. At that time, its price was only 2439 euros, not 2872 euros. In addition to the second laser head, an air assisted compressor is also provided.

Source: Laser Net

Recomendaciones relacionadas

  • Tianjin University's Photoacoustic Remote Sensing Microscopy Technology Breakthrough New Heights

    Recently, Professor Tian Zhen's team from Tianjin University has made a breakthrough in the field of photoacoustic remote sensing microscopy technology and successfully developed a new type of non-destructive testing method. This technology uses Kaplin high-power femtosecond laser as the key light source, further optimizing the solution to the internal flaw detection limitations of inverted chips,...

    2024-04-16
    Ver traducción

  • Scientists plan to build particle accelerator to power giant chip factory

    Scientists are exploring new ways to get around limitations on the lithography machines used to produce microchips. Researchers are using particle accelerators to create new laser sources that could lay the foundation for the future of semiconductor manufacturing.Plans are underway to build a particle accelerator with a circumference between 100 and 150 meters (328 and 492 feet), about the size of...

    2023-09-25
    Ver traducción

  • Intel installs the first EUV manufacturing tool that can emit lasers hotter than the sun

    Chip giant Intel announced that it has completed the assembly work of the world's first commercial high numerical aperture (NA) extreme ultraviolet lithography (EUV) scanner. This device greatly improves the resolution and feature scaling of next-generation chips by changing the optical design used to project printed images onto silicon wafers.This lithography equipment weighing 150 tons has been ...

    2024-04-22
    Ver traducción

  • Mirico successfully raised $2 million with unique laser dispersion spectroscopy technology

    In the field of high-performance gas sensing intelligence, Mirico stands out with its unique laser dispersive spectroscopy (LDS) technology, successfully raising $2 million in the latest round of financing.Recently, Mirico announced this good news. This financing is led by Shell Ventures and New Climate Ventures, with support from the UK Innovation and Science Seed Fund (UKI2S) and other existing ...

    2024-06-28
    Ver traducción

  • Scientists demonstrate a new optical neural network training method that can crush electronic microprocessors

    The current deep neural network system (such as ChatGPT) can quickly improve energy efficiency by 100 times in training, and "future improvements will greatly increase by several orders of magnitude. Scientists from MIT and other institutions have demonstrated a new optical neural network training method that can crush state-of-the-art electronic microprocessors.Moreover, the computational density...

    2023-09-27
    Ver traducción