Español

New, low-cost, and high-efficiency photonic integrated circuits

845
2024-05-10 15:41:16
Ver traducción

The rapid development of photonic integrated circuits (PICs) has combined multiple optical devices and functions on a single chip, completely changing optical communication and computing systems.



For decades, silicon-based PICs have dominated the field due to their cost-effectiveness and integration with existing semiconductor manufacturing technologies, despite their limitations in electro-optic modulation bandwidth. Nevertheless, silicon optical transceiver chips on insulators have been successfully commercialized, driving information flow through millions of glass fibers in modern data centers.

Recently, the lithium niobate wafer platform on insulators has become a high-quality material for photonic integrated electro-optic modulators due to its strong Pockels coefficient, which is crucial for high-speed optical modulation. However, high costs and complex production requirements have hindered the wider adoption of lithium niobate, limiting its commercial integration.

Lithium tantalate (LiTaO 3) is a close relative of lithium niobate and has the potential to overcome these obstacles. It has similar excellent electro-optical quality, but has advantages in scalability and cost compared to lithium niobate, as it has been widely used in 5G RF filters in the telecommunications industry.

Now, scientists led by Professor Tobias J. Kippenberg from the Federal Institute of Technology in Lausanne and Professor Ou Xin from the Shanghai Institute of Microsystems and Information Technology (SIMIT) have created a new type of PIC platform based on lithium tantalate. PIC utilizes the inherent advantages of materials to make high-quality PIC more economically feasible, thereby changing the field. This breakthrough was published in the journal Nature.

Researchers have developed a lithium tantalate wafer bonding method that is compatible with silicon on insulator production lines. Then, they covered the thin film lithium tantalate chip with diamond-like carbon and continued to etch the optical waveguide, modulator, and ultra-high quality factor microresonator.

Etching is achieved by combining deep ultraviolet (DUV) lithography with dry etching technology, which was originally developed for lithium niobate and then carefully adjusted to etch harder and more inert lithium tantalate. This adjustment involves optimizing etching parameters to minimize optical losses, which is a key factor in achieving high-performance photonic circuits.

Through this method, the team was able to manufacture efficient lithium tantalate PIC with an optical loss rate of only 5.6 dB/m at telecommunication wavelengths. Another highlight is the electro-optic Mach Zehnder modulator (MZM), which is a widely used device in high-speed fiber optic communication today. The half wave voltage length product of lithium tantalate MZM is 1.9 V cm, and the electro-optic bandwidth reaches 40 GHz.
"While maintaining efficient electro-optical performance, we have also generated soliton micro combs on this platform," said Chengli Wang, the first author of the study. "These soliton micro combs have a large number of coherent frequencies, making them particularly suitable for applications such as parallel coherent lidar and photon computing when combined with electro-optical modulation functions."

The birefringence (dependence of refractive index on optical polarization and propagation direction) of lithium tantalate PIC is reduced, enabling dense circuit configurations and ensuring broad operational capabilities in all telecommunications frequency bands. This work paves the way for the scalable, cost-effective manufacturing of advanced optoelectronic PICs.

Source: Laser Net

Recomendaciones relacionadas
  • Innovative laser technology: a novel quantum cavity model for superradiance emission

    Quantum optics is a complex field where theoretical and experimental physicists collaborate to achieve breakthroughs in explaining subatomic level phenomena.Recently, Farokh Mivehvar from the University of Innsbruck used the most comprehensive model in quantum optics, the Dicke model, to study the interaction between two groups of atoms in a quantized field. This new study makes it possible to obs...

    2024-03-16
    Ver traducción
  • Upgrading 3000W fiber laser to high energy and miniaturization has become a new trend

    Recently, the discussion on "miniaturization" in the domestic laser industry has become increasingly heated. From various exhibition venues, miniaturization and lightweight have become important display directions for fiber laser manufacturers.High energy and miniaturization have become new trendsIn the past few years, high-power has undoubtedly been the main development direction in the field of ...

    2023-09-20
    Ver traducción
  • The construction of China's first attosecond laser device in Dongguan provides strong impetus for breakthroughs in multiple major fundamental scientific issues such as quantum computing

    On October 3rd, the 2023 Nobel Prize in Physics was announced, recognizing scientists who have studied attosecond physics, marking the beginning of the attosecond era for humanity.At present, China's first attosecond laser device, the "Advanced attosecond Laser Facility", is being prepared and built in Dongguan, Guangdong, providing strong impetus for breakthroughs in multiple major basic scientif...

    2023-10-07
    Ver traducción
  • The research team has solved decades long challenges in the field of microscopy

    When observing biological samples under a microscope, if the medium in which the objective lens is located is different from the sample, the light beam will be interfered with. For example, when observing a water sample with a lens surrounded by air, the light bends more strongly in the air around the lens than in water.This interference can cause the measured sample depth to be smaller than the a...

    2024-04-27
    Ver traducción
  • The influence of laser beam drift on SLM thin-walled TC11 specimens at high scanning speed

    AbstractDue to the width of the laser melt pool and the sintering effect on the surrounding powder, the experimental size of the selective laser melting (SLM) sample will be larger than the design size, which will greatly affect the dimensional accuracy and surface quality of the thin-walled sample. In order to obtain SLM thin-walled TC11 specimens with precise dimensions, an orthogonal experiment...

    02-24
    Ver traducción