Español

Researchers are studying lasers for controlling magnetic ripple interactions

346
2024-02-11 19:24:33
Ver traducción

One vision for computing the future is to use ripples in magnetic fields as the fundamental mechanism. In this application, magnetic oscillators can be comparable to electricity and serve as the foundation of electronic products.

In traditional digital technology, this magnetic system is expected to be much faster than today's technology, from laptops and smartphones to telecommunications. In quantum computing, the advantages of magnetism include not only faster speeds, but also more stable devices.

A recent research report published in the journal Nature Physics reported an early discovery on the road to developing magnetic computers. Researchers generated two different types of ripples in the magnetic field of thin alloy plates, measured the results, and indicated that the magnetic oscillators interact in a nonlinear manner. "Nonlinear" refers to outputs that are not proportional to the input, which is a necessity for any type of computing application.

So far, most research in this field has focused on one type of magnetic oscillator, which is described as equilibrium under relatively stable conditions. As done in these studies, manipulating magnetic oscillators can cause the system to lose balance.

This is one of the many studies conducted through years of collaboration between theorists and experimenters from multiple scientific and engineering fields, including the second study recently published in the journal Nature Physics. This project has received support from both government and private funders, bringing together researchers from the University of California, Los Angeles, Massachusetts Institute of Technology, University of Texas at Austin, and University of Tokyo in Japan.

"Together with our colleagues, we have begun a movement that I call stimulating progress in non-equilibrium physics," said Prineha Narang, co-author of the study and professor of physics at the University of California, Los Angeles. The work we are doing here fundamentally advances the understanding of non-equilibrium and nonlinear phenomena. It may be a step towards computer memory, utilizing ultrafast phenomena that occur around one billionth of a second.

A key technology behind these findings is an advanced technique for adding energy to samples and evaluating them using lasers with frequencies in the terahertz range, located between microwave and infrared radiation wavelengths. This method comes from chemical and medical imaging and is rarely used to study magnetic fields.

Nalang, a member of the California Nanosystems Institute at the University of California, Los Angeles, said that the use of terahertz lasers indicates potential synergies with increasingly mature technologies.

"The terahertz technology itself has reached the point where we can talk about a second technology that relies on it," she said. It makes sense to perform this type of nonlinear control in the frequency band where we have lasers and detectors that can be placed on chips. Now is the time to truly move forward, because we have both technical and interesting theoretical frameworks, as well as theoretical frameworks for studying the interactions between magnetic oscillators.

Researchers applied laser pulses to a 2mm thick plate made of carefully selected alloys containing yttrium, a metal used in LED and radar technology. In some experiments, a second terahertz laser was used in a coordinated manner, which paradoxically increased energy but helped stabilize the sample.

The magnetic field is applied to yttrium in a specific way, allowing only two types of magnetic oscillators. Researchers can drive two types of magnetic oscillators individually or simultaneously by rotating the sample to a specific angle relative to the laser. They are able to measure the interaction between two types and find that they can cause nonlinear responses.
"Clearly demonstrating this nonlinear interaction is important for any signal processing based application," said co author and postdoctoral researcher Jonathan Curtis at the University of California, Los Angeles NarangLab. A mixed signal like this allows us to convert between different magnetic inputs and outputs, which is necessary for devices that rely on magnetic manipulation information.

Narang said that trainees are crucial for current research and larger projects.
"This is a very arduous multi-year effort, involving many parts," she said. What is the right system, how do we use it? How do we consider making predictions? How do we limit the system to run the way we want? Without talented students and postdoctoral fellows, we will not be able to do this.

This study includes Keith Nelson, a chemistry professor at the Massachusetts Institute of Technology, Eduardo Baldini, a physics professor at UT Austin, and a team led by Narang from the University of California, Los Angeles, with support from the Quantum Science Center, which is the National Quantum Information Science Research Center of the Department of Energy and is headquartered at the Oak Ridge National Laboratory. This study is primarily supported by the Ministry of Energy, as well as the Alexander von Humboldt Foundation, Gordon and Betty Moore Foundation, John Simon Guggenheim Memorial Foundation, and Japan Association for the Advancement of Science, all of which provide ongoing support for collaboration.

Source: Laser Net

Recomendaciones relacionadas
  • French researchers develop spiral lenses with optical vortex effects

    As humans stand at the forefront of a new era of space exploration, the National Laboratory of the International Space Station is taking the lead in carrying out a groundbreaking initiative that may completely change the way we understand and utilize space for research and development. In a recent development, Northrop Grumman's 20th commercial supply service mission has become an innovative light...

    2024-02-17
    Ver traducción
  • From Fiction to Reality: Laser Cutting Technology Has Entered the Shipbuilding Industry

    Laser cutting is a type of metal processing. In industry, there are three main cutting methods: mechanical cutting, thermal cutting, and a set of high-precision cutting methods. Laser technology belongs to the third category. The cutting in this method occurs due to the influence of the laser beam on the product. In fact, it is the molten metal produced by rapid pulse point melting and then blowin...

    2023-12-28
    Ver traducción
  • Shanghai Institute of Optics and Fine Mechanics has made progress in the research of interferometer wavefront calibration methods

    Recently, the research team of the High end Optoelectronic Equipment Department at the Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, has made progress in the study of wavefront calibration methods for interferometer testing. The relevant research results were published in Optics Express under the title of "High precision wavefront correction method ininterometer tes...

    2024-07-23
    Ver traducción
  • SEMA 2023: Huali's Easy Level Floating Free Laser Fuel Level Transmitter

    Winning the SEMA Best Engineering New Product Award is not an easy task. Therefore, it said a lot about Huali's new non floating fuel transmitter bringing hardware home. The Easy Level fuel level sender is a brand new design that does not rely on traditional float arm settings, but uses a frikken laser beam to measure the fuel level in the tank.More precisely, Easy Level uses LiDAR technology to m...

    2023-11-03
    Ver traducción
  • Transforming solid-state single photon sources using multifunctional metalenses

    Quantum photonics is one of the important research directions in the quantum field, which utilizes the unique properties of light at the quantum level. The core of this field is the deterministic single photon source, which sequentially emits individual photons through spontaneous emission and is the cornerstone of quantum communication, computing, and secure encryption. However, under environment...

    2024-02-26
    Ver traducción