RDC6563F - Autofocus Raytools BM110 doesn't work

there are 2 items should be eanbled . see the picture attachment. 
the RDC6563 has more functions, user can enable the auto-focus or disable the auto-focus according to different layers. this supply a flexible selection for users 

• Juan Barkhuizen

  : Hi, I have the RDC6563FG-Lite and when I try enable the Focus Ctrl setting I get A Axis error. I have the Raytools BM110 3.3kw Chinese laser head. If i manually move the A axis motors when going to the Diagnostics > Motor Test. The motors move, but when I enable focus ctrl they dont move and I get an A axis error. Do you have any idea why this is?

please show us the software version and the version of the controller

• Juan Barkhuizen

  : I am using RDCutist V3.02.20(Beta02) and have uploaded a pic for the Ruida Controller info. I have done more testing, the Ruida is not stopping the motor rotation during A axis calibration even when it hits the Proximity switches, making the motor get stuck and cause error 20 on the Leadshine Servo. I think the issue might be that the Proximity switches in the Raytools BM110 are the PNP type, as when they are triggered there is 5V output on the wire. Am I missing something here? Sorry for bad quality pictures
• Snow Sun

  : Our controller only support NPN type switches. So there shoulde be a problem. and i need your controller version except the software version

• Juan Barkhuizen

  Responder

  @Snow Sun

  : I made new post, Issue was not the limit switches I confirmed they work. The A axis reset fail error is still there. I do not know where the controller version is but on the back there is this RDC6563FG-LITE(EC) S/N: EC563100700082

• Otras 4 respuestas