Nun bin ich neu hier des Englisch aber nicht mächtig ! Woo finde ich alles auf Deutsch ??

Payson

2024-01-16

202

1

1

HelloI recently purchased a S9 sculpfun laser and am having some problems. Some of them I have been able to solve by tightening the belts and tightening properly the eccentric nuts (the 3 that the equipment has). However, I am having two problems that I have not been able to solve.In the photos you can see a vertical oscillation at the beginning ...

Terrelle

2024-01-16

219

1

0

I recently got a LightBurn camera, calibrated the lens to .12-.13 in the various positions and aligned the camera. Everything worked fine for several weeks then today, its way off. I haven’t changed anything. I suppose I should realign it again. But, is this a common occurrence, or is it something else? I was within 1-2mm before, now I’...

Gilbert

2024-01-16

219

1

0

Hello everyone,I’m trying to engrave using grayscale mode, I have a hard time figuring out which part is at full power, which part are in a small power.Is there a way to see the power it will engrave at a given point before launching the engraving ?Regards.

Smith

2024-01-11

200

2

0

Recebo esse erro "Attempted to access an unnamed file past its end' quando tento abrir um arquivo importado de outro computador com a mesma versão do sotfware. Versão RDCutist V3.0 3.02.20

Rene

2024-01-13

268

1

0

I am trying to make a calendar and want to use Date/Time with the Variable Text (MMM). When I copy it by making an array wit either the 9-squares or the circle array and I click on test, it gives for every month “jan”. So I have 12 months of januari instead of Jan, Feb, Mar etc.Am I doing something wrong, or is there a bug in the Date/T...

Darren

2024-01-11

221

1

0

Why isn’t the engraving uniform?

Miller

2024-01-11

196

1

0

Hi, I am are having some problems with my unmarked laser. The laser head cannot find home, the parameters are messed up so, the laser head hits the sides of the machine, and it does not cut the right size anymore so I think the scaling is off as well. The laser was working just fine a couple of weeks ago. I use RdWorks to run the laser. If anyone h...

q0kM3hNW

2024-01-11

202

1

0

I’d like to simulate an image mask, but instead of an image I’d like to use a pattern made with layers. Any help is appreciated!

Aaron

2024-01-10

218

1

0

Is there a way to store a shape that I use on a regular basis. I would love to be able to assign it a hot key., I know I can save it and import it, I’m just hoping there is a way to do it more streamlined. Similar to the way you can make brushes in Photoshop.

Marshall

2024-01-10

219

1

0

A chiller is a common industrial refrigeration equipment widely used in various industries such as electronics, chemical, mechanical, pharmaceutical, etc. Its main function is to quickly dissipate the heat generated by industrial equipment, maintain the normal working temperature of the equipment, and thus ensure the normal operation of the product...

Tory

2024-01-09

207

1

0

Hello, trying to understand this error or characteristic of Lightburn 1.4.05, with TTS 40.I drew a hexagon and in the height and width measurements, I defined it as 100 x 100 mm and these measurements are actually applied to the hexagon, see the rulers, however the sides have different measurements, on the AB side I have 50 mm and on the BC side 55...

David

2024-01-09

209

1

0

I tried to make a 7.54mm round hole to accommodate a clock movement and I measured the shaft, it was 7.54mm so I made a circle and I input 7.65mm so it would be a good fit. When I burned it on a scrape piece of wood the diameter was like 1/2". can anyone tell me what Im doing wrong?

Jamie

2024-01-09

199

1

0

Ive got a galvo fiber laser with bjjcz controller and a k40 with the monport lightburn board. Which product license do i purchase?Do i get the 150$ Galvo licenseordo i get the 60$ gcode and 90$ galvo add on?Little confused here, thanks!!

Robert Evans

2024-01-08

202

1

0

How can I join A to B to make one line without using group. Either with or without the little tail at the top of A. I just can’t seem to work out how to do this in Lightburn so would appreciate some guidance - or is it just not possible?

John Trant

2024-01-08

269

1

0