I have a ThunderLaser Nova 24. The head goes to the home position after the job has completed. If I am engraving in the bottom of a tray with say one inch sidewalls what would be the best way to instruct the head to stay within the confines of the tray when engraving is complete? Trying to avoid a head crash.Thanks to all!  

Hiroko

2024-09-26

251

1

0

Is there a way to change many shapes that are on one layer over to a different layer without having to highlight each one individually?

Narrator

2024-09-25

214

1

0

Can anyone help with auto air assist, I upgraded motherboard Atom stack to allow auto air on/off, it worked perfectly untill the last Light burn update, the on/off button in the cuts/layers is set ot on, is there something in the background that needs setting.

Andre J

2024-09-23

251

2

0

What I want to achieve is when I open LB the cut parameters are permanently assigned to the colours at the bottom of the screen.How do I do this?

bernd.db

2024-09-24

263

1

0

Moving with the keypad either works fine, or doesn’t work at all. I feel like I must be missing something that enables it, but I haven’t found it yet. Any clues? 

Iron Man

2024-09-24

263

1

0

hello！I am running the SculpFun S30 Ultra 33W with (what I think is the info needed) [VER:1.1h.20230313:] [OPT:V,15,128]. I am running Lightburn 1.6.03 on a Macbook Pro M1. I can connect tio thge S30 with my USB serial. However, almost every time I try to connect via the Bluetooth option, the console reports that “Port failed to open - already in ...

이야기 너와

2024-09-23

246

1

0

My LightBurn program is not fill engraving correctly. Is there a setting that needs to be adjusted to remove the lines left in the engravings?I ran two identical tests back to back. 1 in LightBurn and 1 in XCS and the LightBurn test has lines all throughout and is very dark, whereas the XCS test looks good.LightBurn settings for the box with the ...

Jack Wilborn

2024-09-20

214

2

0

ALARM:9This is the message I’m getting.“Homing fail. Could not find limit switch within search distance. Defined as 1.5 * max_travel on search and 5 * pulloff on locate phases” Somebody Please HELP!

AL.TAL

2024-09-20

222

2

0

After installing a new X-tool D1 pro 20W, the laser will only frame and return to home. The laser never fires. I discovered the machine settings selection, under edit has disappeared. The Settings and Device setting selections are still there. How do I get back the Machine settings ???. I was already using and X-tool extended laser on this computer...

Cruise Wang

2024-09-18

223

1

0

I am on the free trail version of lightburn, hoping to transition to lightburn fully (if all goes well), i am having trouble connecting the machine to the software (lightburn) via “find my laser” window and I don’t know the laser controller to do it manually, as the machine came with instruction manual that just refers to EzCad2 and no other descri...

JOST

2024-09-18

261

1

0

I’m trying to use my rotary with Lightburn 1.6.03. However, when I try to set the steps per rotation and wheel diameter using a roller rotary, Lightburn will not save and store the settings. It will go back to the default settings. The roller rotary was working. What am I missing? 

이야기 너와

2024-09-14

219

2

0

I am cutting out two plywood rectangles to be glued back to back using the same rectangle drawn in Lightburn but when I fit the plywood together, it does not line up square. What am I doing wrong? Thanks!

Andre J

2024-09-14

274

2

0

hello everyone! trying out 1.7rc 7one thing ive found is it wont save cut settingshave checked and load defult layer settings on new or start up is on

Ruddy

2024-09-13

230

1

0

Hello! I recently purchase a new machine, and it’s the first and only machine I have that has an auto-focus and a Z axis that uses a stepper motor. This got me thinking about how I can use this to engrave curved objects without the use of a rotary and to my understanding X-Tool has a machine that can do this.I want to create a height map that uses...

Erdogan

2024-09-13

239

1

0

Product DescriptionAP8854 is a wide voltage range step-down DC-DC power management chip that integrates enabling switch control, reference power supply, error amplifier, overheat protection, current limiting protection, short circuit protection, and other functions, making it very suitable for wide voltage input step-down use.AP8854 with enable con...

Leon

2024-08-17

240

2

1