Hello all. I hooked up my Ortur Extension to engrave longer pieces and changed my settings but when I hit Frame the laser goes to about the middle right of the project and just stops. Any suggestions? Seems to be only this particular project.

Terrelle

2023-12-26

371

1

0

I Recently Added the Falcon laser rotary roller to my 5w laser. According to the instructions that came with it. I had to enter $101=60.375. It then tells me after use to change $101 to 80. What does that mean? Also with the rotary off, and back to normal cutting, my circles are oval. I am assuming i have something wrong and cant figure it out. Nev...

Gilbert

2023-12-25

369

1

0

Hey all, I have a halfway decent PC but I notice that when I run other resource intensive programs my laser starts to stutter even though none of my resources are at 100% usage. Just wondering if there’s any setting within Lightburn to give it priority?

Cyril

2023-12-25

416

1

0

I have a new Longer B1 40w laser added the Atomstack AC1 completed the install / camera calibration / camera alignment… yet when i place objects on the grid place where i want my artwork/text… update overlay ever thing looks aligned and good press START… and its always off … soo I make 3 circles top middle and bottom to ...

Darren

2023-12-25

392

1

0

Hello… I am new to laser engraving/cutting. I purchased a TTS 10 Pro with a Dewalle air assist. I was able to connect everything. However, my Z axis has to be about 18mm above the wood to cut, which is not enough room to get my air assist underneath. Is there another way to mount the air assist so that it does not have to be underneath?

Abel

2023-12-23

439

1

0

I have used Lightburn for over a year and it continues to stop during jobs. This as cost a tremendous amount of lost time and materials. I’v tried everything. every post Iv read deals with windows operating systems. Im using a Mac with macOS Monterey version 12.3 can anyone help with this issue for a MAC? Im using a Ortho Laser Master 3 VIA U...

Aaron

2023-12-23

362

1

0

I’m a fairly new lightburn user. This is the first time i’m actually drawing in lightburn (as opposed to just importing images) I wanted to draw some text over a shape, but I quickly found that there’s no resize handles on the text. I have the curved arrows for rotate, but not the square handles for resizing. See the attached scre...

Marshall

2023-12-22

357

1

0

Hi there … newbie here. I have engraved my new logo and social media contacts but when i come to cutting rounded corners this is what is happens. Lines are not straight. Maybe the picture i uploaded gives a better feedback. Any suggestions? Project and Result pics included.

Keegan

2023-12-22

498

1

0

Any tips or tricks for measuring from the nozzle to the material when determining focal distance? I’ve tried calipers from a stationary point on laser head but it doesn’t seem as accurate as it should be. Hoping for some ideas to take the guess work out.

Tory

2023-12-22

403

1

0

on mij windows 11 machine witch i use to conect to the laser i cant use text with invillwith mij windows 10 machine i kanwhy

Robert Evans

2023-12-18

456

1

0

I can’t find the ¨fire¨ in order to see were my laser hits

John Trant

2023-12-18

362

1

0

Im using a LM3 with a 10 w laser and having issues with X axis cutting deeper than the Y axis. This happens on wood, leather and cardboard. It also happens when using the Materials Test in Laser Tools.Any help would be appreciated !

Jen

2023-12-18

371

1

0

I am attempting to make a universal test card. The measurements for the card, which was downloaded from LA Hobby Guy, are based on using a 5.5w laser. I am using a 10w laser. what should I adjust the measurements to? I am new to laser engraving, so any advice would be greatly appreciated.

roy

2023-12-15

438

1

0

I have a LightBurn camera 5mp 150. Running lightburn on windows 8. I’ve ran the calibrate on camera lens and alignment. The issue I’m having is the update background is grayed out.What is it I’m missing?

jessie

2023-12-15

409

1

0

I am trying to cut out a design and it seems like the laser is making the cutout lines a little bit wider. I am doing 3/8 wood with power at 40% and 500mm speed. Attached is two images to help illustrate. The rectangle on left is original 2 passes and the one on the right is pass three, four etc. As you can see the line is wider. Any idea what may ...

Patrick

2023-12-15

408

1

0